1, the power supply voltage is unstable and too low, so the voltage of water is too small to drive the rotation of the Feng Shui Ball, which requires us to choose a suitable water pump for the Feng Shui Ball according to its diameter or its own weight. It is worth noting that the power of water pump is quite different from the manufacturing technology of Feng Shui balloon manufacturers. The Feng Shui ball made by high-tech manufacturers has higher roundness, which greatly reduces the friction between the ball and the ball holder, and makes the Feng Shui ball dance freely under the power of a smaller pump. In turn, it saves consumers a lot of electricity bills!
2. The stone ball is stuck by sundries. After a long time, the water inside is turbid, or it may be that the water inlet of the pump absorbs some fallen leaves and other sundries, or it may be stuck between the ball and the ball holder, which hinders the normal operation of the Feng Shui ball. Therefore, it is necessary to manually clean and replace the water in the pool to ensure the normal operation of the pump.
3. The angle of tee will change. After a long time, the ball holder changed its original angle under the drive of the ball or other reasons. This requires us to carry out reasonable and effective debugging according to the water outlet phenomenon and experience. The water flowing out of a high-tech feng shui ball is evenly distributed, usually around the ball holder. If this is the case, you can observe the phenomenon of water flowing out of your Feng Shui ball to determine which direction the ball holder is high (low), so as to keep the ball holder level with the hard object below. If the water is uneven when you buy your Feng Shui balloon, it will be difficult. You can only take a chance or ask a professional to debug it. Of course, the feng shui ball doesn't turn. If the above steps are not solved, it is suggested to try the following steps to solve the problem that the Feng Shui ball does not turn, as the case may be.