Excuse me, there is a big gap in front of the courtyard of the building. How to make the gate look good?

First, choose the location of the fence door, which is generally not opposite the hall door on the first floor, but slightly off. Generally, the center of the gate is not opposite to the roof top, nor is it in the corner of the house. The gate can be capped or uncapped, and the height of the fence is 60 ~ 70 cm. Here, every 2, 5 ~ 3 meters (according to the total length of the fence, the bricklaying pier is about 1.3 ~ 6550) or 304 stainless steel fence is self-determined, which is beautiful and generous. After the fence is installed, choose the 28 cm exterior wall brick and paste the color of your choice, usually green, yellow and red. Do some modeling on the pier of the gate and the added fence roof. The gate is also made of wrought iron or 304 stainless steel. The water in the fence goes out from both sides of the gate, not through the gate, which means that wealth does not flow out from the gate. The grades from the main courtyard to the fence are generally level one, level three and level five. The pier of the fence gate is about 2-4 meters higher than the small profile of the fence, and the gate is 2,88 meters wide. Based on the external wall brick, the root of the fence is made into a flower pond with a height of 80 cm and a cement floor with a height of 25-28 cm.