2. Then print the petals (inner petals and outer petals) with thin white paper, print them on white cardboard and light yellow card paper respectively, draw the outline with pencil respectively, and then cut the edges with scissors. Similarly, the stamens are printed and carved with orange paper and a meat cleaver.
3. Glue the edges of the outer petals to form a complete ring.
4. Hold it by hand until it dries, and then do the same for the petals inside.
5. Print with blue card paper and print the lines on it, or draw by hand, cut the black lines with a meat cleaver, and then fold them in half along the center line.
6. Pass the two winglets at the lower part of the outer petal through the corresponding two holes on the card, then apply glue on the back, and then press it firmly by hand, while the inner petal is inserted into the hole near the center line, and the back is also glued firmly.
7. Then insert the stamens closest to the center line, and the two stamens should just cross together, and then stick the back with glue.
8. Make two scratches on the four corners of the card cover with a meat cleaver, so that the four corners of the blue card paper can pass through.
9. all right! After simple steps, the three-dimensional card of lotus is completed.