First, what are the taboos for opening the door?
1, it is forbidden to destroy the door with a sledgehammer, otherwise it will destroy the wall structure;
2. If there are pregnant women at home, it is forbidden to open the door and install the door, because there is a saying in Feng Shui that the fetal god occupies the door and it is easy to move to the fetal air when starting work;
3, the height of the door must be reasonable, it is forbidden to use too low and too small door, otherwise prone to congestion;
4. It is forbidden to leave seams at the gate of the fence, otherwise it will be easily discussed.
Second, what should I pay attention to when installing the door?
1. When handling solid wood door panels, try to avoid scratching or colliding with door frames and doors. When placing door frames and doors, they should also be placed stably on a well-ventilated indoor horizontal ground that is not exposed to direct sunlight. Remember to put the door frame and door leaf obliquely to avoid damaging the door frame and door leaf.
2. The wooden door must be installed in the ground engineering (such as floor tiles and stone materials) at the mouth of the cave, and then the wall putty should be leveled and polished (the hole where wall tiles and stone materials need to be pasted on the wall, and all around the hole must be pasted) before the wooden door can be installed.
3, wooden door installation method must adopt the reserved hole installation method, it is forbidden to use the practice of building by laying bricks or stones while installing.
4. Check the hole wall humidity when installing the wooden door. If the hole wall humidity is 25%, the installation can continue normally; If the humidity of the installation hole wall is 25%, a moisture-proof isolation layer should be made on the installation hole wall.
5. If the wooden door is installed in the corner or T-shaped wall, a false wall with a surface width of not less than 50mm should be made on the side without the battlements before installation. Of course, the width of the fake wall here can be determined according to the width of the line, so as to avoid the asymmetry of the door edges displayed on both sides.
6. If the door frame is made of medium density fiberboard, screws are needed to spell the door frame; If the door frame is a multi-layer board or a solid board, remember to fix it with nails when spelling the door frame.
7. When installing the door frame, adjust the verticality of the door frame to avoid damage to the door frame due to the dry expansion when the foaming agent is applied.
8. Because there may be lines on both sides of the door frame, it is necessary to operate correctly when installing the door frame with electricity.
What are the taboos of sliding doors? If you believe in geomantic omen, you must pay more attention to relevant knowledge when you dismantle the door, so as to ensure that the door at home is dismantled perfectly. What should I pay attention to when installing the door? When installing the door, aim at the angle to ensure that the door is installed correctly, and there is no situation that the installation is too low or too high to affect the switch.