What should I do if the size of the ring is adjusted?

Question 1: Can the size of the ring be modified? Everyone's fingers are different in size, and a wedding diamond ring is a luxury after all. No matter how good a jeweler is, he can't sell a perfect diamond ring. When you find that the ring doesn't fit, it's a pity to lose it. It will take time and money to buy it again. Then, in fact, if the diamond ring doesn't fit, you can modify the ring. But try not to change it if possible. Professionally, not every diamond ring can be resized. It depends on the style and weight of diamond ring and metal ring before resizing. Generally, it is no problem to have a plain ring with no pattern one or two sizes larger. Plain rings are relatively difficult and easy to damage patterns. Those stents that are too slim to pursue smooth lines should avoid changing the size. You can master a simple standard: if the total weight of a diamond ring is below 1.8g (including the weight of the diamond itself), it means that the amount of gold used is small and the ring is thin. When changing the size of the hand, the external force applied is easy to cause injury, so change the size carefully. In addition, if the bracket fixes the diamond with fewer stress points, such as two-point or three-point fixing style, it must be cautious. The change of diamond ring is relatively small. Generally, physical changes are used, and it is ok to knock the ring directly. In the case of large or small size changes, the original ring is usually cut. As a general jewelry store, they may not have special equipment such as gas welding, so they may make some modifications. The bigger the ring is, the weight of the ring itself will not decrease, but the texture of the ring with decorative ring will decrease compared with the ring without decorative ring. Although it is convenient to buy the finished wedding diamond ring, in order not to affect the overall layering of the diamond ring, it is also a good choice to choose your favorite loose diamond and customize it online. When the diamond ring is modified, it is most important to choose a merchant with better technology, because if the technology is not very good, your diamond ring is likely to show signs of modification after wearing it for a period of time, and if the technology is better, there will be no similar situation.

Question 2: The ring has been resized. Can it be revised? The diamond ring may have been changed again.

But yours can't be changed, at least I don't recommend it, because the original state of your ring is 12, and the diamond ring can be enlarged or reduced by up to three sizes. You have changed to the limit, and if you change it again, it will be out of range. But when you change it, they may change it for you, because it feels like it's changed from 9 to 8, so they don't rule out the possibility of changing it for you. . .

But I don't recommend it. . Because the ring has been completely changed, including the size and setting angle of the ring will affect the setting strength, and it is very likely that the diamond will loosen. . .

If you can, you may wish to wrap some transparent fishing lines under the ring, which will not affect the appearance very much. You can basically wear your finger number when it is hot in summer. . Because people's hands will get thinner in winter. In summer, hands tend to be raised, and then you will feel that the hand index may be appropriate. . .

It is not recommended to change. . .

Professional advice from jewelry sales staff

Question 3: What if the ring size is too big? If you buy a big ring, you can change the size. If you can't change it, wrap it around the inside of your finger. If it is customized, you can ask if you can change the size. These are basically the ways. My ring was made to order at Darry Ring. I knew at that time that the size of the ring could be modified for free. You can learn about it. This ring is also quite special. You need a man's real name to customize, and you can only customize one in your life. Very romantic. If you want to give someone a ring, I don't know the size. It's best to choose a living ring.

Question 4: How to resize the adjustable ring How to resize the adjustable ring:

1, it's easy to adjust if you have a ring stick.

2. If not, just put it on your hand and adjust it yourself. In your hand, press the inner part of the circle to the appropriate position first, and then press the outer part of the trap to the appropriate position.

After adjusting the size, pay attention to fixing it, otherwise it will be easy to Sichuan. The following is the fixing method.

1, the most common is to wrap red rope.

2. Cut off a section of thin rubber tube with a hanging needle, then put on the ring with movable mouth, first put half of the interface in, then put the other half in, then put the rubber tube in the middle, and finally fix the position. The hose is very soft to wear on your hands, but it will be a little gray after a long time and needs to be replaced frequently.

There are generally three ring sizes for split rings, 16# inner diameter 16MM, 17MM inner diameter 18# inner diameter 18MM, and the most commonly used one is 17#. The size of the open loop can be adjusted. In addition, it is better to ask the size of this ring, which is safer.

Question 5: The diamond ring has been resized. Changing the size of the ring will not have any effect on the diamond, but changing the size will have an impact on the gold weight of the ring holder, and the lettering inside will be worn away because of resizing. This is not a big problem. Let the merchant carve it for you again.

As for looseness, it is generally unlikely, but it should be checked frequently. If it is found to be loose, it is best not to wear it. Just give it to the merchants and let them reinforce it for you.

Question 6: How to make the fixed-size ring smaller? You have to take it to a professional store to buy it. Of course, it costs some money. However, it is suggested that you must choose the right size when buying a ring. When you buy a big ring, you change it into a small one, which not only reduces the materials, but also requires the cost of processing. Not cost-effective

Question 7: What can I do to change the size of the ring? The jewelry store has a master who specializes in modifying rings. If you buy it in this store, you can usually modify it for free. The master took good care of it, leaving no trace after modification.

Question 8: The size of the ring is adjustable. How to determine the size? I can't help it. Take it to the jewelry store. 3 yuan at most (in Hunan).

They fix it with an infusion tube, don't worry, it's unused, and then it's wrapped in red thread.

Another way is to burn it, but I don't think they will choose this one because it will burn black and look bad.

It's usually no problem to go to the local big jewelry store.

Question 9: How to change the size of diamond ring? If you mean diamonds, you should go to the place where you bought them. There should be a trade-in service or a trade-in service. Generally, you can get a discount and add money. If you mean changing the ring, changing the size at the place where you buy the goods is also free. I hope it will be helpful for you to adopt my opinion.

Question 10: How can I make the size of the ring bigger? You mean the ring is tight on your finger. If so, it can generally be enlarged, because the material of the ring is generally malleable. You can choose to expand yourself or go to the store you bought.

I found a cone-shaped wooden stick, wrapped it with cloth to prevent the ring from being scratched, put the wooden stick through the ring ring, and slowly and forcefully press the ring down, so that it can become bigger after repeated times.