I. Desk size
1, the size of partitioned desks was basically uniform at the initial stage of listing, and the style was relatively simple. At present, many desk sizes are based on this standard size. The standard size commonly used by four people is 2400 * 1200 * 750 mm.
2. In order to control the cost of office furniture, some companies will customize some smaller partition tables, which not only saves the purchase cost, but also saves the space. The size of this desk is generally 1000*500mm.
3. At present, the shapes of partition tables are all the same, such as arc and rectangle. However, no matter which shape it is, the approximate size will not be much different. The common ones are W1200 * D600 * H1200mm.
Second, the choice of desk method
1. Before buying, I need to measure the size and dimensions of my office, and then, according to the company's corporate culture, operation mode and business needs, I will conceive the indoor plane structure and geomantic format, so that the size of the furniture can match the size and height of the office, and prevent the office furniture from failing to meet the needs after being placed.
2. Office furniture is not consumable. When purchasing, we should face up to the principle of "rather short than much". We should not fill the office, but buy according to the needs of the application. The area of office furniture should not exceed 50% of the indoor area.
3, high quality, worthy of the name, solid and reliable. If it is pure wood furniture, please note that its water content cannot exceed 12%. Office furniture should be straight, diagonal lines should be consistent, landing should be smooth, hardware should be firm, and doors and drawers should be sensitive to opening. Leather office furniture must be smooth, bubble-free, crack-free, and stitched neatly.
4. Whether the edge contour of wooden furniture is smooth and the angle is very accurate; For the decorative parts on the edge and surface, see whether the decorative parts are glued evenly, whether the bonding is firm and whether the trimming is flat; Whether the end faces of visible parts such as side panels, door panels and drawer panels are edge-sealed; The assembled parts depend on whether the tongue and groove at the drilling hole is exquisite and neat, and whether the joint is firm after installation.
5, positioning, the positioning of the conference table is based on the size, image and qualification of the company. If the company is a big company with good qualifications, then the positioning of the company conference table is the high-end conference table. If the company is relatively small and does not have a certain scale and qualification at the beginning of development, then the middle and low-end conference tables can be appropriately selected. If it is a studio, it will be downgraded according to the situation.
There are many sizes of desks, and the positions of different sizes will be different. So what are the sizes and selection methods of desks? Everyone knows after reading the introduction of the above small series.