The method of bulk cement tanker is as follows: 1. Cement tank car: start at idle speed, and put the operating handle in the state of "mixed feeding" and "high".
2. The ready-mixed cement mixer stirs and pulls materials: the operating handle is placed in the "stirring" position. The front drive shaft of the mixer cab should be lifted to the position where the control handle is locked.
3. Unlocking: When the handle operation is "mixed feeding", if the propulsion is stopped in the cab, it can be unlocked by locking the handle.
4. Ready-mixed cement material: For the main operation, the handle is set to "low" or "high" and should be locked in the specific task discharge status slot.
5. Stop the mixing drum: put the operating handle in "neutral".
Whether the cement tank car releases the feed from the feed or the left and right distribution operation handles, it should stay in the neutral position and transfer the front suspension cylinder to the next working state. The mixing tube of cement tanker should be filled with water through self-inspection. If there is water, the speed control of the 700- 1000 rpm drive will be pushed out, and the substances released by the operating handle will be removed from the water.