What parts need to be removed to replace the heater water tank of the old Jetta?

The instrument panel, steering column, gear lever and other accessories need to be removed. Because of the complicated process, it is recommended to go to a regular auto repair shop for disassembly and maintenance. Warm air water tank is a heating component in the heating system of automobile air conditioning, which mainly plays a heating role.

The heater tank and the whole fan assembly are located in the middle of the vehicle, especially under the dashboard. If you want to replace the heater tank, you need to remove all the instrument panels, which often takes more than two hours, while the replacement and maintenance takes about 40 minutes, and the reinstallation takes another two hours.

Before removing the instrument panel, remove all relevant accessories, including air duct, glove box, radio, instrument, middle section, center channel and steering wheel, and then loosen the three screws on the instrument panel. It should be noted that one of the screws is in the clock.

As long as the instrument panel is removed, the fan assembly can be taken out, but the two pipes in the engine compartment must be removed first, which will inevitably lose some antifreeze, so it is necessary to add new antifreeze or replace it after reinstallation.

Million car purchase subsidy