Gypsum board ceiling corridor top Feng Shui gypsum board ceiling corridor top 1: The upper part of the building corridor is not suitable for color selection. Light color is recommended. Since the roof represents the hint of wind and water, then the floor represents the floor. Since ancient times, there has been a saying that "the sky is light and the earth is heavy", so the roof color of Jiezhuang Pavilion should not be too dark. You can choose this type of white, light yellow and other colors to make your vision more comfortable and avoid overload. In addition, dark colors tend to make people feel negative and lack motivation.
Gypsum board ceiling corridor roof 2: the design of corridor ceiling should not be too short. In feng shui, residents will feel depressed if it is too short. Medium height and relatively soft indoor air have a good influence on the general wealth of families.
Acceptance requirements of gypsum board ceiling aisle roof. 1, the top surface of the corridor of gypsum board ceiling should be very flat, without unevenness, and the joints should be very uniform, without difference, and there should be no stains, cracks and missing corners on the ceiling.
2. There should be no leakage, light transmission or deformation on the top surface of gypsum board.
3. The perforated plate is perforated. When drilling, the hole must be perpendicular to the board surface. The requirement of separation holes is that the layout is very clean. The side of the rectangular plate must be at right angles to the plate surface, and arrangements should be made.
4. The decorative effect of the gypsum board ceiling corridor roof on the house is still outstanding, so attention should be paid to the above during acceptance, and there should be no capillary holes, cracks or uneven painting color and incomplete patterns.
5. The acceptance requirement of the ceiling corridor top is to emphasize its flatness, and this acceptance point has special regulations, which may cause problems, such as ripples, grooves, scratches or uneven paper.
6. There should be no ventilation holes, spots and cracks. Embedding decorative gypsum board in front will affect the final design effect.
7. Ensure that the installation position of the light keel is correct, and the connection point should be very firm, free of loose stones, and free of bending and deformation defects. There will be no delamination and cracks on the cover plate.