The function of the water tank is to dissipate heat for the working engine, and to prevent overheating of machinery and metal expansion from affecting the work. The water in the water tank is a special antifreeze for cars, which can prevent freezing and prevent the water temperature from being too high, which is higher than the boiling point of water. Generally, there is no leakage, and no water is needed. 40,000 kilometers, it is recommended to replace. During normal operation, the water temperature is kept at about 85-95 degrees.
Extended data:
1. There is a flat plastic screws inside the lower part of the water tank. Loosen the water tank cover and open it.
2. Open the driver's seat. There is a heating pipe under the thermostat. Loosen the retaining clip and pull out the drain pipe. You can also remove the exhaust pipe under the jack above the water tank. Pencil-thick black pencils exhaust too slowly. )
3. After the water is used up, tighten the waterproof switch and add water (antifreeze) until the water (antifreeze) flows out of the heating pipe under the thermostat cover, insert the water pipe and tighten the fixing clip. (The effluent can be extended for a long time as required.
Only there is a drain switch at the bottom of the water tank. Tell me to change the water, turn on the drain switch of the water tank and fill it up, okay? Thank you! Follow up. Complete the filling.
But cars need ventilation,
If the drainage is improper, the water temperature will be very high.
Don't change it yourself