Precautions for using heaters How to maintain heaters?

As a kind of household appliances, heaters should be paid more attention when used. So what are the precautions when using the heater? How should we maintain the heater? Next, let Bian Xiao explain it to you.

A, the use of heater matters needing attention

1, three hole socket must be used, and the power of the heater is high, and qualified three hole socket with grounding wire must be used, otherwise there will be the danger of electric leakage. It should not be used with high-power electrical appliances at the same time, otherwise it will easily damage the electric heater. The socket should not be located directly above the electric heater to prevent the heat from rising and burning the power supply.

2, away from flammable materials, the back from the wall should be about 20 cm. If it is used in the bathroom, it is best to install the power socket outside the bathroom. The wires of the electric heater should be protected by insulating rubber, and the connection with the body can ensure 100% waterproof.

3. It is forbidden to cover the heater. Keep a certain distance from the electric heater when drying clothes. The electric heater should not be covered with flammable materials.

4, do not get close to the electric heater, it is easy to burn; Some people who are afraid of cold blow electric heaters directly on their bodies. Although it is warm for a while, it will burn their skin after a long time.

Second, how to maintain the heater

1, heater water tank after a period of driving, there is a layer of foreign matter and dust on the surface, if not cleaned, it will affect the heat dissipation.

2, in order to have a good heating effect, and make the body work normally, prolong its service life, try to make the position of electric heating gas conducive to air circulation and heat dissipation.

3, with a soft cloth dipped in household detergent or soapy water scrub, can't use gasoline, toluene and other solvents to release, so as not to damage the shell, affect the appearance or rust.

4. After the operating system is used for a long time, the control cable is prone to aging and deformation, resulting in inflexible or inadequate control. Don't move it rigidly to avoid damaging the parts. If you find this problem, you should go to the maintenance station for judgment and repair and replace it according to the specific situation.

5, don't need to use, to clean, dry the body and then put it away, don't put it in a humid environment, put it in a dry place for self-preservation.

The above is about the precautions in the use of heaters and the instructions on how to maintain the heaters. You can try it according to the above method when using it.