First, the installation location selection
1, lighting must ensure different lighting required for various activities. Writing, playing games, resting, meeting guests, etc. No matter what kind of activities, there must be corresponding lamps to play a role. This kind of lighting should be a scientific light distribution, so that people do not feel tired, which is not only beneficial to eye health, but also saves electricity.
Lighting should set off the room more beautifully. Light irradiation should take care of the outline, level and main image of everything in the room, and also reflect and even beautify the colors of some special furnishings such as ornaments, hanging pictures, carpets, vases and fish tanks.
3. Lighting should be reliable and safe. Lamps and lanterns are not allowed to have leakage and fire, and they should be turned on as soon as they are turned on and turned off as soon as they are turned off.
Second, the installation of feng shui taboo
1. Friends born in February, March and April in spring, choose yellow crystal lights and place them in the east or southeast of the living room.
2. Leave a lamp that stays on all night, which can not only illuminate at night, but also replenish energy. The ever-burning lamp can boost life.
3. Crystal can help improve fortune. Generally, amethyst, topaz and green ghost can be selected. Amethyst and green ghost are both good luck, while topaz is good luck.
4. The shape of the lighting is round and square, and the weird shape has a bad meaning in Feng Shui. Red light is easy to cause irritability, anxiety and nervousness, so it is best not to use it.
Third, the installation steps
1. crystal chandelier installation-tool materials
(1) In order to achieve better installation effect, there should be sufficient lighting after installation, and the required tool materials should be determined in advance, so that the crystal ceiling can achieve the best decorative lighting effect in the process of installing crystal chandeliers.
(2) In order to be suitable for adequate lighting, tools, such as safety ladders, screwdrivers, screws, pliers, rulers, hammers and electric hammers, need to be prepared before public service. These may be used in the process of installing crystal chandeliers, such as adhesives, plastics, glass plates and so on.
2. Crystal chandelier installation-test voltage
(1) To ensure safe operation, the power supply should be turned off first, and the live wire, ground wire and zero wire of the power supply should be separated. The ground wire is the main loop in the room, and the live wire is the connecting wire in the switch. Before installing the crystal chandelier, the voltage should be tested to clearly control the brightness of the lamp.
(2) Each set of lamps and lanterns must be connected with ground wire and live wire for the next operation, mainly to reduce the hidden danger index and protect the safety of users.
3. Crystal chandelier installation-fixed ceiling
(1) Before fixing the ceiling, turn off the power and fix the crystal chandelier base on the ceiling, but avoid other embedded lines on the ceiling to avoid damaging other power lines.
(2) Fix the crystal chain on the ceiling where it needs to be installed. The chain also needs to be reserved for a certain length so as to adjust the lighting angle in the future.
4. Crystal chandelier installation-connection circuit
(1) You can start to connect the power cord of the crystal ceiling. If you don't have professional operating experience and electrician knowledge, try not to install it yourself. First, use a wire stripper to peel off the insulation glue outside the wire, and then thread the wire into the central hole of the crystal chandelier base. Then, wrap this wire and the wire between the two sides of the chandelier with insulating tape, and take insulation measures to avoid short circuit.
(2) Re-insert new lamps and lanterns, and install ground wire and live wire respectively. Don't put it wrong.
5. Crystal chandelier installation-install lamps and lanterns
(1) You can start installing the lamps. When the power cord is connected, the baseline is worn and the link is fixed.
(2) The installation of crystal chandeliers is more particular. The length of the hook, the height of the chandelier and the installation position of the lamps have standard specifications. Be sure to pay attention when installing.
Fourth, daily maintenance.
Keep the lamp body in balance: if all the lamp beads are to be removed for cleaning, large lamps should pay attention to the balance of the lamp body when removing the lamp beads, and they should be removed together.
Wipe the crystal beads: When wiping the beads, dip a soft cloth in the water diluted by detergent, and wipe the front and back of the crystal beads at the same time.
Wipe the bracket fittings: When wiping the bracket and fittings, do not touch the soft cloth with water or alcohol water, so as not to affect the lighting effect of the lamp holder.
Replace accessories in time: if the connecting buckle rusts and discolors, it is best to replace it by the way; If bead string defects are found, they should be filled in time.