Preparation materials: membrane, resin and mortar.
1, surface repair method
Because the muddy water in the pool is not dense during construction, the whole pool is a little biased and pockmarked. After a long period of water erosion, if the water stop is not firmly fixed, water leakage will occur. At this time, film materials (such as epoxy resin or resin-impregnated glass cloth) can be laid along the same crack surface, especially the vegetable washing pool, and nontoxic and pollution-free environmental protection materials should be used.
2. Filling method
If there is a large area of water seepage in the bottom plate of the pool, there should be cracks around the pool. If the crack is too wide, it is suggested to fill it with resin mortar or reinforce it with impervious mortar or asphalt. After treatment, you need to wait for 7 hours before using it, otherwise the filling material will be invalid.
3. Spray method
An injection tube can be set at the crack first, then the repair material is injected into the concrete, and then it is sealed by surface treatment.
4, replace the corresponding accessories
You can choose to replace the corresponding accessories, or the plug of the pool is loose, so you can choose to use universal glue.
5. Replace the plug
If the plug of the pool is loose, you can choose to use glass glue, but when choosing glass glue, you must choose good quality.
6. Starting system
Improper installation of sewage system leads to water leakage. Then in this case, you can reinstall the sewage system. If you can't handle it yourself, you can ask a professional to handle it.
7, water pipe rupture
Water leaks only when the water pipe is broken. If the water pipe is slightly damaged, you can buy waterproof tape directly from the market. Wipe the bad place clean and tape it directly, but be sure to buy good quality waterproof tape, which is more durable. If the gap between water pipes is large, you can directly replace a water pipe.