First, the rockery bonsai production
Make rockery with water stone, the method is as follows:
(1), tool
Small and medium-sized axes or machetes, hacksaws, pickaxes, small clay tablets, flat files, old scissors or pointed meat cutters, high-grade cement, etc.
(2), material selection
Water stone can be divided into three types according to its structure: soft, hard and fossil. No matter which material is chosen, the texture, type and grain should be unified with the main body. It is best to use only one material for a bonsai, and the colors should not be too different.
(3), processing
1. Flat bottom
Determine the position of the bottom according to the texture and shape of the stone. Large and hard stones can be leveled with an axe or machete. Smaller and softer stones can be sawed flat with a hacksaw. Don't cut too much and make the bottom too big. When placing stones, don't dump them.
2. Rough machining
According to the shape and conception of the flat-bottomed stone, the overall outline and the position of peaks and caves are conceived, the distribution of peaks and valleys is roughly seen with an axe or machete, and the outlines and shapes of peaks and valleys, cliffs and other parts are outlined with a small pick. Soft stones can be processed with scissors or sharp knives.
3. Fine processing
In the process of finishing, it is necessary to clean up and deepen the peaks and valleys that are not completely exposed during rough machining, remove the traces of knives, axes and picks left during rough machining, and try to make the texture look natural. Therefore, the process must be light, detailed and accurate.
4. Compensation splicing
In the process of processing, because there are many unknown holes hidden in the stone, or because of improper force in the process of processing soft stone, it is easy to cause damage to the stone that is not in harmony with the overall layout. At this time, according to the damaged position and degree, methods such as hole, hanging, ditch, stream, digging and planting can be used to remedy. If the damage is large or the stone is small, and several pieces need to be spliced together, cement can be used for splicing. The splicing position can be covered with moss or cave plants as needed.
5. Moss and marijuana
Raw moss can be maintained in a place where the sun is not direct, and it can be pasted or brushed. You can also brush starch water on the water stone once, such as water for soaking shredded potatoes.
A good bonsai should choose the right pot. Polyethylene trays, square sinks, fruit bowls and incubators can be used during ripening. When placing pots, marble, porcelain and purple sand are used as materials, which are generally oval or square, and are selected according to the conception and composition of rocks.
From the above, we can know that we can choose some common materials and tools to make rockery bonsai, such as kitchen knives, scissors or cement, which are easy to obtain, and before designing rockery basin, we should make clear the size and structural factors of the products so as to adjust them in time during processing and operation. I believe that after a period of hard work, we will certainly harvest unique and cost-effective handmade rockery bonsai.
Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~