But in fact, in addition to these two floors, it is not recommended to buy. In fact, there are these two floors, and you can't buy them at any lower price.
First, avoid the "equipment layer"
The equipment floor is a necessary design for the normal operation of residential buildings. The equipment floor generally refers to the floor where mechanical and electrical equipment is placed, mainly including elevator room, electricity, water supply and drainage, water, electricity and gas pressurization equipment, broadband lines, air conditioning equipment, etc. The device layer has three main disadvantages:
First, the equipment is noisy. The loudest noise of a building comes from the equipment floor, which is why we often hear the roar. There is more noise near the equipment floor, which affects residents' rest at night, such as the secondary pressurization of water wells.
Second, there may be voltage radiation, such as households with too close electric wells. Although there is no data to show how much impact it has, it can be avoided or avoided.
Third, from the perspective of geomantic omen, the equipment floor and the next floor of the equipment floor are not prosperous, and the equipment floor is not prosperous, and these equipment are on the top of the room on the next floor, which is also unfavorable. On the contrary, this situation does not exist in the upper layer of the device layer, and the overhead will be much better without these things.
So, where is the equipment layer? It depends on the specific situation. Generally speaking, for houses under 30 meters, the equipment floor is on the top floor, roof or basement. Every 10-20 floor of a high-rise residential building is equipped with an equipment floor. For example, for a 32-story residential building, the equipment floor will be set around 16 floor. If you want to find your own equipment floor, you can take the stairs for modern buildings. Generally speaking, the floor you go to is the equipment floor.
Second, avoid the "waist line layer"
Waist line layer, according to the height of different floors, the position of waist line will be different, generally in the lower or middle position of the floor. The role of the waist line layer can never play the role of earthquake prevention and stability of the building as the salesperson told you. Its function is only to make the building look more layered and beautiful. For residents, more experiences are negative, mainly in three aspects:
First, it affects the lighting of residents. The waistline is generally at the window, and there is a waistline protruding from the balcony. Generally speaking, the height difference between the waist line window and the non-waist line window is about 60cm. You can make up your mind that the lighting is obviously seriously affected. Of course, the ventilation effect will also be affected to some extent.
The second is to affect the safety of residents. The waist line is wide enough for one person to stand. If there are villains with evil thoughts, it is easier to go door to door through this waistline, and the personal and property safety of residents will also be threatened.
Third, it is difficult to clean. In case of rain, snow, or even garbage thrown by upstairs residents, it is not convenient to clean it up without cleaning it up. Cleaning often makes you want to cry.
After reading the analysis of the above two floors, I believe everyone knows when buying a house. Here, I also want to remind you that in the sales office, the unfavorable factors of "equipment layer" and "waist line layer" are basically not publicized, mainly affecting sales and prices. So even with these defects, the price the developer sells you is the same as the normal floor. If you buy such a floor, it will not only cost more money, but also affect the quality of living. In addition, even if we feel unlucky to live, if your house is to be resold, the buyers will see the existing house, which is obviously not conducive to the sale. Therefore, when you buy a house, try to avoid these two floors.