The appearance of electric faucet solves the problem of using hot water in people's daily life, makes people's life more convenient and fast, and is also a warmth and care in cold winter. Then those who are not familiar with the installation method of electric faucet can follow us to learn about the installation method of electric faucet and its precautions. I hope it helps you after reading it.
Installation steps of electric faucet:
Step 1: First, remove the commonly used faucet.
First of all, you have to close the water pipe valve, remove the original non-electric hose and clean the pipe joint with clean water to avoid excessive rust and infarction.
Step 2: Assemble the parts
1. First connect the elbow of the electric faucet with the main body of the electric faucet, and then fix the machine.
2. If the washbasin is to be used, unscrew the nut of the main water inlet and fix the electric faucet on the washbasin; If the washbasin is not used, this step can be omitted.
3. Then connect the electric faucet with the tap water pipe.
check
1. After installing the electric faucet, first turn on the water valve switch and check whether the connector can leak water.
2. Then turn on the electric faucet switch to drain the machine, and turn on the hot and cold water switch for debugging several times.
3. Plug in the power supply after the air bubbles in the empty machine are completely discharged.
4. Adjust the hot water to the required position, because the temperature of the hot water is adjusted by the hot water size control switch. A red light will indicate the start of heating.
Precautions for installation of hot water faucet:
1. After the electric faucet is installed, turn on the power first, then turn the handle up and down, and then turn on the power supply for use. (First time only).
2. The electric faucet has two kinds of water flows, cold water and hot water, and the hot water does not need to be unplugged frequently when the power supply is cut off.
3. The electric faucet is installed by pressure. When the switch is turned to the direction of hot water, it will automatically start heating. When it becomes cold water, it won't consume any electricity. Simple to use, saving water and electricity.
Matters needing attention in using electric faucet:
1, when in use, the maximum outlet water temperature shall not exceed 50 degrees Celsius.
2. It is forbidden to use it upside down.
3, the nozzle must be kept clear, often clean the nozzle hole, can't jam, it is forbidden to use water flow switch and other flow blocking parts to access the nozzle.
4. This water heater can be used to connect water supply pipe network and metal fittings to keep the product well grounded.
5. The pressure of tap water used shall not exceed the use pressure marked by the sign, and it must be reliably grounded.
6. The user should check whether there is a switch on the watt-hour meter, switch, fuse, circuit wire diameter and the circuit leading to the water heater when installing. The capacity of these devices should meet the current demand.
7. Because the capacity of the civil power grid is generally small, you should not use this water heater with other large-capacity household appliances (rice cookers, air conditioners, vacuum cleaners, etc.). ) at the same time.
8. If the water in the water heater may freeze, it is forbidden to turn on the power of the water heater.