Analyze and introduce the sequence from the entrance of the door.
Open the door alone (the first door into your living room)
Generally around 850- 1000MM (MM= mm). After all, it is the gate, with a slightly wider width, which gives people a more generous and decent feeling.
Mother and child gate (one big and one small)
Generally, the total width is about 1050- 1200MM, the sub-doors are about 300MM, and the rest are mother doors. In this way, when carrying large furniture, it can be convenient to go in and out.
Bedroom door (room door)
Generally, the door of the bedroom is about 750-800 mm, of course, some people are bulky, or the width of outsiders in the north is 800-850. This is a more humanized design.
Kitchen door
Generally, there are many sliding doors in the kitchen door, which can be pushed single or double. The total width of the door varies from 1400- 1800-2000MM, which is allowed. It needs to be separated from your actual space.
If it is a single door, you can consider the width of 700-800 mm, because some sizes of refrigerators and household appliances are already 600MM wide. It was harder to put it in when I was young.
Toilet door (toilet door)
The door in this place can be narrowed a little. After all, in and out 1 person. Most of them are designed to be 550-600 mm wide.
How to measure the size of the inner door?
1. international door survey method: standing at a distance of 2000 mm from the door opening, visually inspect the verticality, width and height of the left and right walls and the top wall at the narrowest and widest places (considering the floor height), and measure the data with an international tape measure respectively.
2. Chinese measurement method: First measure the width (upper, middle and lower points) with our standard 5-meter tape measure, then measure the height (left, middle and right points), and then take the minimum value of the upper width and the lower height as the target size. Finally, measure the thickness of the wall, measure the thickness of the left and right wall and the top wall respectively, take the maximum value as the target size, and measure the relevant data (the width error standard is 40mm and the height error standard is 30mm, (it is best to unify the width and height of the same household or the same floor).
1. Measurement at the door
Width of doorway: measure the left and right distance of doorway horizontally, and select more than five measuring points for measurement, in which the minimum value (minus the adjustment allowance of doorframe) is the extension width of doorframe.
Height of the door opening: measure the distance between the upper and lower sides of the door opening vertically, and select more than three measuring points for measurement, in which the minimum value (minus the adjustment allowance of the door frame) is the protruding size of the door frame: (Note: pay attention to the ground treatment when measuring, and reserve the thickness of the ground decoration material for later use).
Wall thickness of door opening: measure the wall thickness horizontally, and measure at more than five measuring points, with the maximum value being the wall thickness. If the wall needs to be decorated, the thickness of the wall at the door needs to be added with the thickness of the decoration materials.
2. Measurement of door leaf
Door leaf = empty inside door frame-reserved gap
Door leaf width: measure the gap in the door frame horizontally, and select more than five measuring points for measurement, of which the minimum value (minus the reserved gap) is the door leaf width.
Door leaf height: measure the empty distance in the door frame vertically, and select more than three measuring points for measurement, of which the minimum value (minus the reserved gap) is the door leaf height. Note: Pay attention to the ground treatment when measuring, and reserve appropriate size for later use. Door leaf height