Specific operation steps of Feng Shui Zhai in Kong Xuan
The application principle of mysterious geoman
Specific operation steps of Feng Shui Zhai in Kong Xuan
The application principle of mysterious geomantic omen of Zhongzhou school can be divided into two factors to infer good or bad. The first factor is to observe the environment around the house and the distribution of roads, which is an external factor. The view of good or ill luck of dragon platoon and astrolabe (including astronomical map, territory map, fortune map and mountain map) is an aspect of regulating qi and an internal factor. Only by referring these two factors to each other and observing whether the principle of qi and the shape of the mountain cooperate with each other can we judge the real quality of the house. This is the principle of combining air conditioning with chaotic head.
Because many inferences of external causes must be based on internal causes, the internal causes, that is, the metaphysical principle of regulating qi, are first described in the preface. But it must be noted that when choosing a house, we must first look at the outside bureau, that is, the distribution of buildings and roads around the house. If the environment is fierce, we will not consider choosing this house. Only by integrating external factors can we further observe and choose. Therefore, the mystery of Zhongzhou School emphasizes both Qi and Luan Tou. This is different from those who only talk about qi and don't talk about Luan Tou or who only talk about Luan Tou and don't understand qi.
Yang Zhai Feng Shui operation steps:
The compass determines the direction of the mountain of the house.
2. Calculate the center point of the building by geometric method on the floor plan of the building.
Third, measure the platoon dragon
Fourth, the house is divided into eight palaces and twenty-four mountains by vertical rod gauge.
Fifth, discharge the astrolabe in the direction of sitting posture.
Six, corresponding to the floor plan of the actual eight houses, according to the astrolabe and the shape around the house, determine the good or ill luck.
Seven, according to the shape of the mountain around the house, find the key to lucky in the astrolabe, and make lucky to avoid evil through various methods.
The first section is about the selection of Kong Xuan's geomantic ternary compass and polar gauge.
The application principle of metaphysical geomantic omen is the interaction of time and space. Time is established by celestial movement, and the determination of space must rely on a compass. Therefore, the accuracy of compass measurement directly affects the accuracy of judgment. Therefore, the importance of this tool plays an important role in the operation of Feng Shui in Kong Xuan. Let's talk about the purchase of compass in detail!
On the selection of compass
At present, there are three kinds of compasses on the market, namely ternary compass, triple compass and comprehensive compass. Those who study metaphysics and geomantic omen should choose ternary compass and comprehensive compass as the top priority. I use a ternary compass! If you buy it yourself, you can consider a comprehensive compass. If you ask someone to buy it, use a ternary compass for insurance! In case the compass brought back by someone doesn't work. A compass that can be used must have a 360-degree scale around it, and two fixed cross longitude and latitude lines on four sides. The copper disk in the compass can rotate.
From the origin of compass, Taiwan Province Province is the best, followed by Hongkong, and even worse in China! If the students don't have a compass for the time being, I recommend that you buy a domestic compass first, and then you must buy a compass made in Taiwan Province Province when you have the opportunity. The quality of domestic compasses is really poor, and the feel and accuracy of magnetic needles can't be compared with those made in Taiwan Province Province. Therefore, when buying a home compass, it is best to find a compass with a more accurate magnetic needle degree, compare the accuracy of the magnetic needle or the 360-degree scale, and see if there is any deviation in the magnetic needle degree when measuring objects in the same orientation. Because I chose a compass made in Taiwan Province Province, I feel the quality is very good after using it.
In terms of price, Taiwan Province Province is the most expensive, with a ternary plate of about 3,000 yuan, and Hong Kong's is about 1000 yuan, while domestic compasses are the most available in 300 yuan (online), but the quality is not guaranteed. Therefore, when buying a compass in China, you must buy it with a knowledgeable friend or choose it yourself. Still in a word, cheap goods are not good, and good goods are not cheap!
Because the compass is used for orientation, it has certain accuracy in its specification requirements. Therefore, we must pay attention to the following points when purchasing.
Compass must have cross red longitude and latitude lines, and the copper plate in the compass can rotate. Pay attention to the feeling when rotating. And check whether the scale around the compass has a 360-degree scale, and bring a level.
The latitude and longitude of the Red Cross must closely coincide with the four scales on the compass, namely 0, 90, 180, and 270, otherwise it is not available. Domestic compasses have a deviation of more than one degree, so you should be careful when buying them. If only one of the two longitude and latitude lines can overlap, the other one can't. When using it, use the overlapping one to orient it. When using, just turn the whole compass until the overlapping longitude and latitude lines are perpendicular to the plane where your body is. )
3. When rotating, the magnetic needle (with one circle) of the top disk must closely coincide with the right ascension (with two circles) of the chassis, otherwise it will not be available.
When the four compasses are rotating, pay attention to whether they will shake up and down (you can try it by pressing it with your hand). Don't be too flexible or too difficult when rotating, just feel a little resistance!
Fifth, see if the scale on the compass surface is clear, especially on the 360-degree and 24-mountain floors. It's better to be 120 points. Although 120 is a three-in-one thing, it can be used to distinguish between the next divination and the generation of divination.
There are also differences in the size of the six compasses. Usually use an eight-inch compass (the length and width of the whole compass should be 25 cm), so you can see clearly when you are oriented! The compass is too small to make a mistake! These are the places that should be paid attention to when purchasing compasses. I hope readers can buy their favorite compasses!
Dipole manometer
There is also a very important step in Feng Xuan's operation, that is, after the astrolabe, the floor plan of the building to be tested is divided into eight palaces and twenty-four mountains with the help of polar gauge (the method of starting the astrolabe will be discussed in the next chapter), and then the good or ill luck of each palace is judged according to the knowledge of Qi management and Luan Tou, and the overall layout is made. The function of the geodesic gauge is to accurately divide the building into eight palaces and twenty-four mountains for judgment and adjustment! Therefore, polar gauge is also an indispensable tool.
The polar gauge is a transparent plastic plate (not too thick) with 24 mountains and 360 degrees printed on it. The specific application is to find the center point on the floor plan of the room according to the mathematical geometry method, and then make a straight line perpendicular to the building door at the center point (note: this straight line is perpendicular to the door when oriented, with one end sitting and the other end pointing). Generally, a line facing the public housing building is perpendicular to the building door, which is easy to identify.
However, they are not sold in China, and the tool that can replace them is a protractor for mathematics. The specific use method is to put two protractors together to form a circle, and then divide the protractors into twenty-four mountains according to the degrees corresponding to the boundaries of the mountains in the Luo Dynasty. Of course, each protractor is only 180 degrees, so a complete protractor must be composed of two protractors, because both protractors are 180 degrees.
How to orient with a ternary compass in the second quarter
Instructions for use of compass
When using a compass for orientation, be careful not to let the compass be too close to the house to be measured. If it is too close, the compass needle will be affected, and most of them have errors. At the same time, we should also pay attention to whether there are steel bars and ironware in the environment outside the house, because these things will also cause errors in the compass pointer. When the author orients Yiyou's new house, because the residential building is still under construction and steel scaffolding is piled up outside the house, because these steel bars make the compass pointer deviate by more than four degrees, so we must pay attention to the above situation when orienting.
The second cut can't be oriented indoors, because the room is full of reinforced concrete and household appliances, which will affect the magnetic needle degree.
When orienting, the posture of the body must be relaxed. Hold the compass with both hands and put it at your waist. The posture of the body should be to hold out the chest and pull back. First, visually check whether the sideline of the compass is parallel to the side of the measured house (the wall facing the measuring surface). After feeling parallel, see if the level of the compass is tilted up and down. If tilted, adjust the level to a horizontal position (the mercury position in the level is in the middle). Then turn the compass, so that the compass pointer closely overlaps with the red line of Tianchi, and see which word the red line that keeps the front-back (not left-right) relationship with the body is pressed on, so as to orient. This is the body posture in orientation.
It probably takes several times to complete the orientation. Each position should be measured repeatedly according to different distances to see if it is the same sitting position.
Pay attention to the influence of surrounding magnetic field on compass. When orienting, the open mobile phone, the iron and copper belt buckle at the waist and the surrounding cars will all affect the compass, so keep away from these objects when measuring. This is also a place that needs special attention.
Double compass orientation method
The author thinks that Kong Xuan's geomantic positioning method should take the building door as the direction. In Shen Shi's Metaphysics, several ways of standing upright are mentioned, but according to the author's personal experience, the most important and accurate way is to stand upright with the building door.
At present, the more popular vertical modes are as follows.
One is the door to a private house that stands idly by. (If the unit building faces the selfish door)
2. Stand at the gate where the road is.
Third, take the direction of Jiangjunmen. (If the unit building faces the main building door).
Fourth, the orientation is sunny (taking the orientation where the house receives the most sunlight and other factors).
Among them, the most controversial issue is which method is the most accurate in the orientation accuracy of private doors and general doors in several cohabitation houses. Mr. Zhong Yimin, a famous mathematician in Taiwan Province Province, gives priority to the former's private orientation, while some Feng Shui masters in Hong Kong and Taiwan adopt the general orientation method, so the two orientation methods are controversial.
After a lot of practice and verification, the author thinks that the directional accuracy of stair doors is higher than that of private doors. Therefore, the author expresses his views here. The orientation of Kong Xuan Feng Shui should be based on the orientation of the building gate. If it is a single-family house (not a house), it should be based on the orientation of the gate. But when the conjoined building has several doors, it needs to be guided by the building center line.
As we all know, the sitting direction of the tombstone is the foundation of the yin house. The side with words on the tombstone is the direction, and the side without words is sitting. This principle can also be applied to the orientation method of yangzhai. Because when people go to the grave to worship the mountain, the direction of the human body is always facing the tombstone. When people enter the mansion, they have to walk against the house number for a while before they can enter the house. Even the unit building has to go through the main building door (house number) before going to their private house, so the door with house number in the mansion is equivalent to the tombstone with words in the house. And their private house is only a part of the total unit building, and can't be oriented by the door of the private house, otherwise it will be "penny wise and pound foolish". Therefore, the orientation of the house with divided rooms must be the general door orientation.
As for the method of determining the direction according to which side of the road, I beg to differ, because this will only cause all houses to lose sight of the road. Looking at all the cases about Kong Xuanyang's residence in ancient books, it seems that the vast majority of cases have no case that Yang's residence is a waterway leading to the outside world. This shows that the ancients did not adopt this method.
Moreover, in terms of patterns, if the roadside is the first, it will result in patterns that match the actual shape of the astrolabe. There are only two situations: the stars are against the water and the mountains are against the water. There are no shapes of the stars against the mountains and the mercury against the mountains. So the method of road orientation is true or false. After reading the above theory, readers will distinguish between black and white.
The specific orientation method is that people stand outside the house, facing the door of the main building, aim the compass at the door of the building, and turn the compass to make the magnetic needle coincide with the bottom line of the Tianchi red line. At this time, the two ends of the meridian perpendicular to the building door wall are sitting and facing, and the word pressed by the meridian parallel to the body facade is the direction of the house, while the word pressed by the meridian at one end of the building is sitting. Here is a simple way to remember: sit indoors and face the door.
It can be seen that in the measurement method with the stair door as the direction, sitting is the opposite side of the door and the direction is the side of the door. See figure:
Several situations of building door orientation:
Rural bungalows and quadrangles. The door pointed with a compass is the general door of the compound.
Now there are several floors in the building of the rural compound, which is also determined by aiming the compass at the main entrance.
Direction, if there is a fence around the house, the gate of the fence cannot be used for orientation.
Third, the facade house located on the roadside, the door of which faces directly. If some buildings on the first floor are opposite doors, but above the second floor are residential buildings, the rooms on the first floor door enter from the road, and above the second floor are unit doors, it is necessary to check whether the front door on the first floor is connected with the unit door used on the second floor. If the unit door cannot enter the room through the facing door, it is not connected, then the first floor is oriented through the facing door, and the second floor is oriented through the unit door. If the first floor door is connected with the unit building door, it is connected with the front room of the shop through the unit building door. At this time, the shops on the first floor and the houses above the second floor are all oriented by the door of the unit building, and the door of the shop is only considered as a tuyere.
The orientation of the four major factories with multiple office buildings should be based on the building where the factory head office is located, not on the factory door. If the factory is just a processing workshop and there is no adjacent guide rail to do work in it, then the door of the factory is vertical.
Five-story irregular building. For example, there are many L-shaped, U-shaped and even room shapes, which look like an open and upright book. In this case, the main entrance of the whole building is the direction at this time (the doors of general buildings will have primary and secondary positions).
This kind of room is very common in shopping malls or commercial buildings.
Second, this type of room is more common in commercial buildings.
A high-rise building with three or two to four or more exits. At this time, the main entrance shall prevail.
The orientation of the fourth factory is the orientation of the highest leadership office building, not the orientation of the factory gate.
Five inclined doors
Some buildings invite people to see Feng Shui when installing doors. It is possible that the door is not open on the surrounding wall, but inclined. In this case, according to my personal opinion, the orientation should be based on the wall where the door is located. Don't adjust the direction of the door. Give an example to illustrate.
The bottom floor of the six-unit building is a side door, and above the second floor is a house, which is different from the vertical.
In some communities, the first floor of the unit building is a concierge, and the second floor is a private house. At this time, it is necessary to distinguish between these two problems. If the facade room is located on the ground floor of public housing, it does not need the entrance of public housing, but opens the door by itself on the roadside. In this case, it needs to be oriented by the entrance of the ground floor facade room. There is no direction of the unit door. Houses above the second floor all enter and exit through the unit door on the ground floor, so the orientation must still depend on the unit door. If the shops on the ground floor facade can enter and exit from the unit building door, this situation needs to be oriented by the unit building door, not by the door facing the street.
Section 3 Drawings
Determination of building center point
Some simple geometry knowledge is needed here. The floor plan of the house must be prepared in advance: if the house is a simple geometric figure, such as a rectangle, a triangle or even a circle, the center of the house can be found by geometric methods. (I won't elaborate here. The solution can be seen in middle school geometry. )
If the floor plan of the house is not a simple geometric figure, but a compound shape such as an L shape. (Generally, urban suites are like this). First, the plan is divided into several simple geometric figures, and then the center points and areas of the simple figures are calculated in turn according to the formula. Then, in turn, according to the area ratio, on the connecting line of the center points of every two adjacent graphics, find the center point of the merger of two graphics. Similarly, it is easy to find the center of the whole house after several mergers. Central point formula of composite building
After finding the center line perpendicular to the door at the center point, align the center line in the figure with the same degree in the vertical rod gauge with the previously measured sitting degree, and then separate the eight houses in the building. This is the last step of drawing.
If it is a unit in a building, first find out the center line of the whole building, and then find out the center point of the unit, that is, the parallel line from the center line of the building to the center point of the unit. At this time, the vertical rod rule can be used to divide the eight houses of the unit house.
The following are schematic diagrams of the central points of some simple and more complex graphs.
A square
Two rectangles
triangle
The above figures are some simple architectural plans. When drawing, you only need to find out the center points of these figures according to the geometry knowledge you have learned in junior high school. But in practice, almost all houses have balconies. Usually when I operate, I look at the size of the house first. In the case of two rooms and one living room, I mostly omit the balcony area. In the case of one room and one living room, it is necessary to calculate the area of Yangzhai. This is only the author's own operation method, but the most serious thing is to calculate the area of the balcony and find the center point according to the proportion.
Four-l shape
Penta complex
At this point, basically find out the center of a comprehensive building. Finally, draw a red straight line perpendicular to the center of the door (that is, take this meridian as the degree measured when using a compass), and then aim at this red line with a polar compass or compass at the same degree to distinguish the eight palaces. These steps are the first step to see the mysterious villa of Feng Shui.