To make a clay draft, the company will make the molds needed to make bronze figures according to the drawings set by customers. Generally, the molds are made of sculpture clay to make clay sculptures of 1: 1, and the customers will proceed to the next step after confirming that the clay sculptures meet the requirements of the drawings.
The second step of making a bronze statue:
After the clay sculpture is completed, the mold should be turned over. First of all, we must make a good film. After the film is finished, plaster should be coated on the film to make plaster mold.
The third step of making a bronze statue:
Brush paraffin on gypsum. The paraffin on gypsum is to control the thickness of cast copper (if the paraffin thickness is 25px, the cast copper thickness is 25px).
The fourth step of making a bronze statue:
The advanced lost wax casting method is generally used to cast bronze figures.
The fifth step of making a bronze statue:
After casting, the blank is taken out for welding and polishing. After casting, the surface is treated, colored and corroded by colored chemicals. In this way, the bronze statue of this figure was made.