Step 2: Clean
Drain the old antifreeze, clean the liquid channel with clear water, add clear water to the antifreeze replenishment tank, then inject clear water into the tank to make the clear water continuously flow through the engine cooling system, then start idling for 3 to 5 minutes to make the water circulate, and the water flowing out of the water tank is a little pink, and continue to inject clear water until the water flowing out is clean. Don't forget to remove the heater hose and clean the heater tank.
Step 3: Replace with new antifreeze.
In order to make antifreeze flow into the water tank quickly, after draining for about 1 hour, add new antifreeze from the water pipe of the water tank (radiator), and then add a bucket of antifreeze to the antifreeze tank until the antifreeze tank is almost full, and ignite the car for about 10 minutes. At this point, the liquid level of the cooling system drops due to the exclusion of some air, and then antifreeze is added as long as the liquid quantity is at the highest (MAX
Change it every two years or so.