The main function of the distribution main pipe is to distribute the hot water in the pipeline system to the rooms that need heating through the floor heating coil buried under the floor, so as to achieve the heating effect. So, where is the distribution manifold with floor heating suitable for installation?
First of all, the distribution pipe should be installed before laying the floor heating pipe. When installed horizontally, the general water separator is more suitable to be installed at the top and the water collector is installed at the bottom. The center distance is 200mm, and the center of the water collector is not less than 300mm from the ground. If installed vertically, the lower end of the distribution manifold should not be less than 150 mm from the ground.
Secondly, the location of the distribution manifold should be designed where it is easy to control and maintain, and there is a drainage pipe. Not suitable for installation in bedrooms, living rooms, and even less suitable for installation in storage rooms or cabinets.
Finally, for half-floor rooms, the distribution pipes are suitable to be installed at high places or high places respectively. For this duplex structure, the distribution manifold is suitable to be installed on a unified main pipe corresponding to the upper and lower floors.
Where is the distribution manifold with floor heating suitable for installation? As long as we follow the above three points, we can give full play to the role of the distribution main in floor heating.