Factory Feng Shui is different from residential Feng Shui. Residential Feng Shui mainly seeks family harmony and peace, while factory Feng Shui mainly focuses on wealth. What is important is how to make money. Without reasonable planning and layout, it is difficult to operate in the long term. What should be considered in factory Feng Shui planning? Let’s take a look below.
1. The correct location of the factory area
First of all, look at the "mountain shape and water potential" around the factory area, which is called Lailong. The mountain-shaped water potential can be a real mountain or real water, or it can also be an existing tall building, artificial lake, or canal. The factory area should be positioned with its back against the mountain, facing the water, and as far as possible from the front and back to the dangerous mountains and rocks to avoid "big rushes" and "traps".
Of course, when looking at the location of the factory, in addition to looking at the "mountain shape and water potential", it should also "face south and back north" or "face east and back west" as much as possible, or face the southeast to absorb the sunshine. Sometimes, the "mountain shape and water potential" may conflict with the "east-west, north-south" direction. For example, on a south hillside, the factory area must be facing north. This is also a last resort.
For another example, if the government gives you a long and narrow plot of land in the "northeast, southwest" direction, or a more bizarre-shaped plot of land, you must analyze the specific situation in detail and cannot generalize. When looking at "Feng Shui", of course it is important to look at the scene.
2. Wind direction
The importance of “wind direction” in pharmaceutical factory areas is self-evident. The wind direction must be based on the scientific data of the local meteorological bureau. You must learn to read the wind rose chart, and you must not rely on your personal feelings at the moment, because the wind direction changes throughout the year, and the direction of the maximum frequency wind direction and maximum wind force must prevail.
Divided according to the wind direction, such as administrative districts, most of them will be designed in the "center" of the factory area, close to the factory gate, to facilitate "exhalation and gathering of energy", and at the same time echo other buildings in the factory area from front to back and left to right. , the administrative center, is of course crucial. Boilers, power, sewage treatment, waste gas treatment, canteens, and extraction workshops should be downwind to avoid pollution.
The production workshop and preparation workshop should preferably be on the upwind side to avoid contamination. Of course, the production nature of each production workshop, including the distribution of highly allergenic products, must also be considered. It is best for the warehouse to be close to the material gate and between the workshops, so that it can communicate with each workshop to avoid back-and-forth transfer of materials.
Canteens, dormitories, and living quarters can be isolated in a corner, but they cannot be polluted by wastewater and gas from the production area. Zoning is very important in the layout of the entire factory. The principle of zoning is to reduce pollution and cross-contamination as much as possible. The flow of people and logistics is clear and cross-confusion is minimized.
3. Overall concept
When designing the large environment of the universe, the small environment of the earth, the large social environment, and the small environment of the factory, the large environment of the factory and the small environment of the workshop must be considered as a whole. I I have seen a company. When designing the factory area, I consulted a Feng Shui master. According to the peripheral environment of the factory area, it was determined that the office building must be located in a corner of the factory area. The direction and location of the road environment outside the factory and the "mountain-shaped water potential" were chosen. The boss said it was casual about other layouts, but he forgot that the small environment and internal layout of the factory will also change the flow of "feng shui", so you cannot look at one point or one side in isolation, but you must look at the layout of the entire factory three-dimensionally, and consider the surrounding areas The environment and the small environment of the factory area are organically combined and considered comprehensively.
4. Road and architectural design inside the factory area
For a certain building, of course it must also comply with the "no big rush and trap" and look at the "yin and yang directions" "The selection principles of "mountain direction, wind direction", "incoming and outgoing water", and "prosperous star and fortune star", the orientation, layout and opening of the workshop building should also consider the roads within the factory area and the feng shui inside the factory area.