There are two main reasons why the general car warm air is not hot enough after it is turned on. There is something wrong with the cooling system of the engine or the control mechanism of the warm air, which can't work normally. The owner can check the temperature of the two inlet pipes of the warm air small water tank. If both are hot enough, there is nothing wrong with the heating control mechanism. If they are all cold or hot and cold, there is something wrong with the cooling system.
The cooling system of the engine is blocked by air, which leads to the abnormal operation of the cooling circulation system of the automobile and the problem that the warm air is not hot. If the inlet pipe of the warm air small water tank is hot and the outlet pipe is cold, it means that the small water tank is blocked and needs to be replaced.
Extended data:
The introduction of using warm air for automobiles is as follows:
In winter, if you want to make the temperature inside the car heat up quickly, you can try a trick. Start the engine to warm up first, don't turn on the air conditioner blower directly, wait until the water temperature pointer reaches the middle position, then turn on the warm air conditioner, set the air circulation to external circulation, turn off the A/C switch, and wait for a few minutes before changing the circulation mode to internal circulation.
Two working principles of automobile heating. The first method is to concentrate the temperature generated by the engine operation, and then send the heat into the car through the blower to achieve the heating effect. This way is also the most energy-saving way, and it will not increase the additional fuel consumption.
Phoenix. Is the com- air conditioner heater broken in winter? It turns out that they are the culprit.
Phoenix net-the correct operation of turning on the warm air in the car. After reading it, the owner regretted knowing it was late.