What are the disadvantages of wall clothes?
There are not many shortcomings of wall clothes, mainly two points.
1. It is difficult to clean. Wall coatings are water-soluble materials. Although it has a good adsorption effect, it is difficult to clean if it encounters oil and dust.
2, the price is expensive, there are not many domestic manufacturers of wall clothes, most of them are imported from abroad, so it is much more expensive than other ordinary wall decoration materials.
Construction steps and matters needing attention of wall clothes
First, the construction steps
1. Pour the wall clothes into a large clean plastic container. According to the packaging requirements of wall clothes, add an appropriate amount of warm water, and the water temperature is between 20℃ and 40℃. In order to prevent the wall clothes from being polluted, use clean tap water, add warm water and stir well.
2. Before use, leave the mixed wall coating for about one hour. If used immediately, it will reduce the adhesive strength and fluidity of the product. Wait for an hour, and then mix the wall coating evenly to ensure that it does not agglomerate before starting construction.
3. Stick the mixed wall paint on the wall with a plastic spatula, and then roll it evenly with a roller brush. The thickness of the wall coating is between 1-2mm. After the construction is completed and thoroughly dried, if the wall is uneven or bare, you can spray some warm water, then coat the wall and roll it flat. For the exposed small wall, after spraying warm water, you can directly roll it with a roller brush without adding new materials.
4. When the material is rolled for the last time, the direction should be the same as before, otherwise the lines of the wall coat will be messy, and then under the refraction of light, the overall color of the wall will be uneven and the visual effect will be affected.
5. At the yin and yang corners of the wall, you can scrape the flat shape with a plastic scraper, and then roll it again with a roller brush.
Second, the construction matters needing attention
1. It is best to finish the construction of a room in one day to avoid inconsistent wall dryness.
2. Stir the used wall coating. If you want to use it again, please cover the product with a non-fading wet towel to prevent water from volatilizing and deterioration within 48 hours.
3. It takes some time for the wall coating to dry completely. In order to ensure that the wall is not polluted by garbage and dust, the construction site should be kept clean, which can speed up the circulation of indoor air and reduce the pollution of the wall.
Bian Xiao's summary: