Design method of tile floor mosaic
1. Be sure to control the flatness of the ground before laying the floor tiles. If the ground is not very flat, stop laying immediately. Of course, the most important thing in paving floor tiles is to find the right standard points, and the parquet joints must be uniform and must not be misplaced. Generally, we can find the bottom plate and fix it before laying it.
2. Because replacing ceramic tiles will generally destroy the original waterproof layer of cement mortar, waterproof treatment must be done before this. For example, a layer of asphalt waterproof layer can be coated before tiling, and the caulking cement between tiles should also be mended.
3. First soak the floor tiles for about half a day, and at the same time check whether there is a suitable slope and water on the bathroom floor. When you are sure that it is correct, you can start the floor tile construction. After the step of laying floor tiles is completed, the brick surface should be covered with cardboard, and it takes at least one day to walk on the brick surface.
Matters needing attention in mosaic design of tile floor
1: The most basic point of tile ground mosaic is to pave according to the pre-designed scheme, so as to achieve the pre-designed effect;
2. Before paving the floor tile, the surface of the tile should be placed outward vertically against the wall, and the four corners of each tile should be padded with foam to prevent the sharp corners of the tile from being damaged. It is forbidden to press heavy objects on the surface of ceramic tiles.
3. When laying columns, use high-viscosity cement or tile adhesive;
4. When paving, ensure that the base surface of each floor tile is free of loose objects and oil stains, and the surface of the floor tile is firm, flat and clean;
5. Keep the base level flat, and then reserve the thickness of the whole flat-fell seam;
6. When laying parquet tiles, they should be wet-pasted. If the ground parquet is surrounded by the whole brick dry paste, pay attention to adjust the parquet size (height) base first;
7: The whole flower can be paved with the surrounding whole brick at the same time to ensure the flatness of the whole flower and brick;
8. After the floor parquet paving is completed, it is generally necessary to fine-tune the flatness. At this time, gently tap the middle of the floor tile with a rubber hammer, and then adjust the edge of the floor tile.
Ceramic tile floor mosaic is a kind of decoration that many people like. Everyone needs to learn how to design when decorating. The above is the tile floor mosaic design method and design considerations introduced by Bian Xiao today, which ends here.