Can twelfth lunar month be decorated?
Yes, you can.
Although the weather is very cold in December, the quality of decoration materials is ok now, and it is cold-resistant, which will not affect the quality problem. However, it should be noted that many decoration masters have to prepare for the New Year in the twelfth lunar month, and there will be a break in the middle, that is, they have to decorate for the New Year. At this time, you should grasp the decoration period by yourself.
When is it better to decorate?
When decorating a new house, most people should first choose spring, which is a better season. If decorated in spring, the air humidity is relatively small and the water content is moderate. If you choose to start construction in this season, try to choose materials with low moisture content. In general, the construction should be carried out in sunny days. If it happens to rain, remember to protect yourself from moisture and take plastic film for protection. If it is in the south, there will be more rainy season, which is not suitable for construction. Another thing to note is that in spring, decoration companies are often the busiest. If there is not enough manpower to delay the construction period or do things carelessly, it will not be worth the loss. The owner can consider it clearly and strive to ensure the construction period and quality problems.
Matters needing attention in twelfth lunar month decoration
Building work must be "warm"
When the temperature is low in winter, problems such as hollowing will occur after plastering, putty scraping and tile freezing. Especially when painting, we should pay more attention to "keeping warm". Only when the paint is sufficiently dry can the doors and windows be opened for ventilation, and sand cannot fall on the undried paint surface. Experts remind: whether it is mixing mortar or spraying various paints, it is best not to construct in the open air.
Dry-proof and moisture-proof double-sided grasping
The influence of decoration in cold winter on wood is mainly manifested in temperature and humidity. Too low or too high temperature will cause adverse reactions, warping and even cracking of wood. Especially in the current timber market, there are many kinds of products produced by various enterprises with mixed quality. Consumers are advised to choose some well-known brands. In addition, home improvement experts of the service network reminded that the main materials should be prepared in advance, and it is best to put them indoors with heating equipment for 3 to 5 days, so that the moisture content of wood is close to the level in the house to avoid deformation in the future. In addition, after the wood is transported into the decoration site, it should be avoided to be placed in a ventilated place, otherwise air drying will cause the rapid loss of water inside it and produce cracks. When the humidity is low, it is necessary to reduce the ventilation and put a basin of water near the heating facilities to evaporate it, so that the wood can survive the winter safely.
Wood products are sealed in time.
Wood is fragile in winter, which may not be obvious at first, but if the painter does not seal the oil in time, it will easily cause cracking on the surface of the veneer, which will affect the appearance and service life. As for the wood thread used for edging, its moisture content is higher than that of veneer. After processing, the surface should be sealed with oil as soon as possible, otherwise it will shrink and affect the appearance of the veneer.
Wood floor, don't forget the expansion joints.
In winter, when the air is dry and workers are laying wooden floors, an expansion joint of about 2 mm is essential, otherwise it will be easy to bulge in the future. If the heating leaks and the wooden floor accumulates water, it must be dried in time, and it is not allowed to be directly exposed to the sun or baked with an electric stove, so as to avoid drying too fast and cracking the floor. In order to prevent deformation, the floors on both sides of the wall can be disassembled and reinstalled after the moisture dissipates.
Replacing external windows saves trouble.
Many families will replace ordinary windows or aluminum alloy windows with plastic steel windows when decorating. In order to save trouble, some installers don't fix the anchor of plastic-steel window firmly, which will make the outer window deformed or tilted by the wind, which will make it difficult to push and pull it open in the future, and it will also lead to rainwater flowing into the room in rainy days.