Dismantling process of Zhijun warm air water tank

1. First unplug the power supply to ensure safety. Open the lid of the water tank and pour out all the water in the tank. Unscrew the screws at the back with a Phillips screwdriver, remove the cover at the back, and then tighten the handle to pull out the back of the water tank as a whole. Remove the fixing screws of the front air screen and the water pump.

2. Secondly, lift the front of the water tank forward and carry it out. Remove the front air grille. At this point, the fan tray can be completely removed, and then the water pump can be seen. Use a small wrench to remove the control panel cable.

3. Finally, remove the rubber cover connecting the water pipe with a screwdriver. Remove the access cover above the water pump, take out the water pump and keep it dry as a whole. If parts need to be replaced, the original parts can be removed first, and then new parts can be installed. After disassembly, reassemble according to the principle of reverse order, so be careful and patient. These are the steps of the disassembly and assembly process of Zhijun warm air water tank.