How to open the floor heating valve! (with pictures)

Just unscrew the floor heating valve until it is parallel to the water pipe. The picture shows the floor heating water separator valve, in which the upper row is the water separator, the lower row is the backwater separator, and there are also the main water inlet valve and the main water outlet valve, which are opened as follows:

1. The diverter valve of the floor heating water separator opens in parallel with the direction of the water separator.

2. The total water inlet valve and the total water outlet valve of the floor heating water separator are parallel to the direction of the water pipe.

Extended data

Precautions:

1. Floor heating users should close the water supply pipe and return pipe main valve in time after stopping heating, and adopt the state of full water maintenance. The water in the floor heating pipeline is softened water, which can effectively isolate air from entering the pipeline and is beneficial to prolonging the service life of the equipment.

2. After stopping heating, you can remove the dirt remover on the water separator and clean the filter. If necessary, you can ask professionals to thoroughly clean the floor heating pipeline. In general, the cleaning cycle of floor heating is 2-3 years. ?

3. Clean the heating surface with a clean rag. For stubborn stains, you can scrub them with neutral detergent water. Do not use corrosive cleaner or scratch with sharp objects to avoid damaging the radiator. ?

Baidu encyclopedia-floor heating water separator

China Economic Net-These are all things that should be paid attention to after the winter has passed and the warming has stopped.