The making technology of book gift box (bag gift box);
1. Determine the draft design. 2. Confirm the sample and place an order for production. 3. Send production materials (face paper, apron, inner stickers, backing paper, cardboard or density board, inner support materials, etc.). ) .4. Print the wrapping paper and inner stickers (if there is a matching handbag, you need to print the handbag). 5. Post-processing production (lamination, embossing, ultraviolet exposure, bronzing, etc. ) Use a paper cutter to cut the panels, boards and internal supports made of particleboard materials into a given size (the density board needs a professional big saw). B. panel processing: V-groove machine opens V-groove and sticks iron sheet. C, sliding processing: punching a magnet hole. D. Internal support processing: the internal support is gray board, and then the cut silk cloth needs to be glued. For the internal support, it is necessary to tie the cut silk cloth to the molded foam. 7.8. Box assembly (glue coating method can be selected according to material needs: the box is coated with original glue and assembled with glue gun. Pay attention to keep the box clean when assembling, so as not to leak glue and affect the appearance. 9. Paste the backing paper as needed. (Pay attention to keep the box clean) 10. Put the inner brace (the upper and lower asymmetric inner braces should be placed in different directions) 1 1. Wipe the box and pack it (it takes some time to make the box, and it is inevitable that there will be floating soil and stains, and it needs to be cleaned to complete it).
Manufacturing technology of Tiandi cover box (upper and lower cover boxes):
The difference between the production of the cover box of heaven and earth and the book box is that the panel of the bag box is divided into front, top, back and box bottom by V-shaped groove, and the panel wraps the enclosure to form the box, so it is named the bag box.
However, the top cover and bottom cover of the heaven and earth cover box are separated (except the conjoined top cover and bottom cover), and the manufacturing method is somewhat different: 1 The top cover and bottom cover of the upper cover box and the lower cover box made of medium density fiberboard need to be fixed and dried with white latex respectively. (The upper and lower cover boxes made of chip board can be opened with V-shaped grooves, and the four corners can be removed and fixed directly with adhesive tape) 2. Install the treated tissue paper on the upper cover and the lower bottom. 3. The upper cover and the lower bottom are buckled to complete the assembly (the conjoined upper and lower cover boxes need to be connected by connecting plates). 4. Put the inner tray, clean the box and pack.
Manufacturing technology of special-shaped box: the special-shaped box depends on the specific box. Most special-shaped boxes are extensions of heaven and earth cover boxes and bag boxes, and the manufacturing process is similar. (There are polygonal boxes, heart-shaped boxes, round boxes, conical boxes, drawer boxes, multi-layer boxes, etc. )