1. What are the installation steps of the wardrobe rotating mirror?
1. Before installation, a layer of kraft paper should be pasted on the back of the glass mirror.
2. Install the rotating mirror with nails.
3. When installing, add a layer of pure point between the mirror and the wall to ensure the stability and firmness of the rotating pier glass.
4. Embedding method is also a common installation form of rotating mirror.
Second, the wardrobe rotating mirror-what are the precautions for the installation of the wardrobe fitting mirror?
1, when installing the mirror, it is best to stick a safety film on the back of the mirror to prevent the mirror from bursting after collision and fragmentation.
2. Note that the distance between the mirror and the ground is about 30 to 40cm, and the overall height of the mirror is preferably 150cm, which will completely reflect the whole body.
Don't face the door or bed when installing the mirror. From the perspective of feng shui, it will have a psychological impact on people.
Third, the wardrobe rotating mirror-what are the installation methods of the wardrobe fitting mirror?
1, fixing the fitting mirror Fixing the fitting mirror, as the name implies, is directly fixed on the cupboard door, so the installation method is very simple. Choose the right mirror according to the size of the wardrobe door. If you plan to stick it directly inside the closet door, you can stick double-sided tape on the back of the mirror, then apply glass glue and stick the mirror close to the closet door. You can also fix the mirror around with glass clips. Considering the geomantic factors, the fitting mirror is mostly installed inside the cupboard door, so that when the cupboard door is opened, the mirror and the back plate of the cupboard door will rotate at a 90-degree angle, and the user needs to turn at the same angle to use the mirror. When preparing to embed the mirror outside the cupboard door, pay attention to the design. Generally, it is necessary to make a wooden frame shape, coat transparent silica gel on the back of the mirror, then stick it in the frame, press it hard, and then stick adhesive tape on the surface to ensure that the mirror is not loose. After about 4 hours, after the silica gel is completely cured, remove the adhesive tape that fixes the mirror, so that the mirror is installed. Note that the fixed fitting mirror should be installed 30-40 cm above the ground. If the user is tall, the mirror can be installed at a higher height, generally 150 cm is appropriate.
2. Push-pull fitting mirror The so-called push-pull fitting mirror is a rotating fitting mirror designed on the wooden board inside the wardrobe. When not in use, it is close to the side plate, and when in use, it is pulled apart, and the parallel side plate rotates 90 degrees, so that it can directly face the user, which not only does not occupy space, but also is very convenient to use. However, the installation will be more complicated than fixing the fitting mirror. Because of the push-pull function, this kind of fitting mirror needs to be equipped with a frame and a guide rail, and the material is mostly aluminum alloy, which is good in texture and durable.
3. Folding the fitting mirror In fact, folding the fitting mirror is similar to pushing and pulling the fitting mirror, and it rotates after being pulled out. The difference is that folding the fitting mirror can increase the use area of the mirror. Considering the limitation of the internal space of the wardrobe, you can choose to install a fitting mirror inside. If you want the mirror to be bigger, you can choose a folding fitting mirror, which is convenient and fashionable to use.
The above is the relevant knowledge about the wardrobe rotating mirror. Fitting glasses are indispensable in life, especially for female friends. It is very practical to install a fitting mirror in the wardrobe. You can choose the style of wardrobe fitting mirror according to the size of the space, which is suitable for small space rotation.