If the water leakage of the heating box is not treated, the heating box will not work normally, resulting in excessive engine temperature and possible engine damage. The water tank of the heater leaks and needs to be repaired and replaced in time.
The heater box can be disassembled as follows:
1. First remove the workbench and remove the workbench screws. Pay attention to where there are screws. There are screws at the lower two edges of the workbench, and there are two screws just above the wheel arch.
2. Dismantle the instrument assembly, and pay attention to the instrument connecting wire when disassembling to avoid breaking;
3. After the instrument assembly is removed, the whole picture of the heater is leaked. The heater is connected with three screws, first remove the upper one, and then remove the other two screws;
4. Then remove the water pipe connected to the warm air tank;
5. The warmest air tank can be taken out.