what is cement self-leveling
cement self-leveling is a high-tech green product with high technology content and complicated technical links. It is a dry-mixed powder material composed of various active ingredients, which has a wide range of uses. It can be used in industrial workshops, workshops, warehouses, commercial stores, exhibition halls, gymnasiums, hospitals, various open spaces, offices, etc., and can be used as a decorative surface and a wear-resistant base.
construction technology of cement self-leveling
1. Cleaning and sanitation: the floor must be thoroughly cleaned, and it is best to use a damp mop to thoroughly clean the floor, otherwise all those pebbles will be sealed in the ground in the future, and the cushion is only 5mm thick, and pebbles will definitely protrude.
2. Brush interface agent: small interface agent, which is used to seal the bottom surface and enhance the adhesion of the surface. Clean up the original cement floor and start brushing the interface agent.
3. Self-leveling cement: After 1-3 hours, self-leveling cement will appear. Start mixing the materials according to the requirements of the manufacturer, which usually takes about 5 minutes. When a bucket falls down first, the workers begin to flatten it with a scraper. After flattening, they should take the time to roll the defoaming drum completely to reduce the generation of bubbles. After all the places in the house are rolled, just let it dry naturally. At this time, you can see that the ground is as flat as a mirror. Of course, if you see the final effect, you must wait until it dries naturally. Generally, it will be dry after one week, and the judgment method is: the ground turns from dark olive to gray.
conclusion: that's all about what is cement self-leveling. after the above introduction, I believe everyone knows what is cement self-leveling, and at the same time, some techniques should be paid special attention to during construction. I hope the above introduction will be helpful to everyone.