First, how to remove the integrated ceiling steps and methods
It is also convenient to disassemble and clean the integrated ceiling, so how to disassemble the integrated ceiling? Only three small steps are needed: sucking, pulling and disassembling. The manufacturer will provide a small tool, just gently collect it on the board, suck the air away, tighten one corner, then pull it out hard, and pull out all four corners. Then the whole board can be removed and cleaned. After removing the external panel, you can see the internal structure. Among them, the auxiliary keel for edge sealing is installed around each plate, and the auxiliary keel is used as a connection module and a light steel keel to ensure that each plate is closely connected. The integrated ceiling is also easy to install, so press hard along the keel. No special tools are needed, just pay attention to the position of the ceiling with different patterns.
Second, how to remove the integrated ceiling matters needing attention
1. When dismantling the original suspended ceiling, the safety of equipment and facilities on the original suspended ceiling should be considered to avoid damaging pipelines and equipment during dismantling; When the kitchen cabinet is removed from the original ceiling, the air duct and flue should be avoided; Some circuit cables on the ceiling should be removed as far as possible and no longer considered for use; ?
2. The ceiling decoration of kitchen and bathroom should pay attention to the influence on indoor light source, and the ceiling height should be moderate, which will affect the wall decoration and future soft decoration; The safety of ceiling should be given priority in house decoration design. Especially for some old houses whose service life exceeds 15 years, the original building structure has begun to age. In addition, due to the requirements of the original suspended ceiling on the suspension structure, many holes were drilled on the top surface, which reduced the local bearing capacity, so special attention should be paid to the disassembly;
3. The power supply must be cut off first, and the original circuit in the ceiling should be removed as far as possible. Do not consider continuing to use, because the original ceiling circuit is basically useless; ?
4. The safety of the original ceiling equipment and facilities should be considered when dismantling. In the last century, many old houses had heating pipes on the ceiling, and some houses had central air conditioning systems to avoid damaging the demolished pipes and equipment; ?
5. Generally, in the case of secondary decoration of the original ceiling decoration, try to remove it and keep the original ceiling decoration structure. In particular, it is necessary to remove the weight structure of the ceiling, such as the suspenders and hangers in the original ceiling. This is mainly due to future security considerations. ?
6. If the kitchen and bathroom space is demolished, use plastic or plastic steel corner braces on the ceiling. It is recommended to find a professional installer to avoid damaging the original structure or installation.
This paper briefly introduces the disassembly method of integrated ceiling and the matters needing attention in how to disassemble integrated ceiling, hoping to help everyone.
Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~