2. Take out the acrylic glue with a needle and apply it on one side of the acrylic strip.
3. After daubing, stick four acrylic strips around the acrylic board, and then reinforce the four corners with glue.
4. Then stick an acrylic board and wait 12 hours (PS: remember to leave a gap).
5. Extrude colored sand, black gold sand and alumina from the reserved gap with a syringe.
6, after mixing, according to the effect, can increase the proportion.
7. Mix thickener, preservative and water (ratio = 1 ml: 1 ml: 20ml) in a measuring cup and stir evenly.
8. Use a large syringe to extract 20ml of clean water, 1ml mixed liquid and 1ml detergent, and squeeze them out from the gap.
9. Press the center of the acrylic board tightly, quickly pull out the needle tube and dry the surface of the notch.
10, sticking the gap, clamping the gap and waiting for fixing 12 hours.
1 1. Finally, put the finished acrylic board into the frame and shake out the foam, and a landscape quicksand painting is completed.
Note: If the quicksand falls too slowly during the overturning process, you can use a syringe to pump out some air; On the contrary, if quicksand falls too fast, inject some air.