2. Turn down the branch valves with the highest indoor temperature to the lowest temperature in turn, with the highest temperature closed and the lowest temperature all open.
3. Test again once a day, turn down the branch pipe valve with high temperature, keep the branch pipe valve with low temperature fully open, and adjust it several times repeatedly until the temperature of each room is almost the same.
Extended data
The reporter learned that there are two misunderstandings for residents to use floor heating: one misunderstanding is that floor heating is like air conditioning. When people are not in the house, turn off the power and turn it on when they get home, which is more economical. That was not the case.
Because the preheating time of floor heating takes 5 hours, and the water must be heated to the set temperature every time it is turned on, the energy consumption of turning on for 5 hours is similar to that of turning on for 24 hours. Another misunderstanding is not paying attention to the maintenance of floor heating equipment. It is understood that many residents feel that the installation of floor heating is a once-and-for-all thing, and they have never thought about maintaining it, which is likely to cause pipeline blockage.
Because the cooling pipe is buried under the floor, once it is blocked, even the best equipment will become waste. The market is mixed.
People's Network-Floor Heating Consumption Once and for All? It is very important to choose brand merchants.