Volvo s60l location with glass water
The glass water filling position of Volvo s60l is on the side of the engine. After opening the engine cover, find the blue cover next to the engine as the glass water filling position. After opening the cover plate, glass water can be added directly.
The glass water used in the car mainly plays the role of cleaning. When you think the transparency of the front windshield of a car is poor, you just need to spray it with glass water. Especially when driving at night, the dust on the glass will scatter light. After cleaning the car glass with glass water, the front windshield will maintain the best transparency and give the driver a clear vision.
Glass water is mainly composed of water, alcohol, ethylene glycol, corrosion inhibitor and various surfactants. Long-term use of glass water can enhance the transparency of glass and play a role in cleaning and decontamination.
There are three kinds of glass water used in cars, namely summer glass water, winter antifreeze glass water and special antifreeze glass water. These three types of glass water have different effects.
It is worth mentioning that glass water can not only play a cleaning role, but also play an antistatic role after long-term use, which can eliminate the charge on the glass surface to a certain extent.
How to exhaust Volvo s60l antifreeze?
When adding antifreeze, after the antifreeze is filled up, it is necessary to tighten the water tank cover and start the vehicle, so that the engine is in an idle state, and the engine can be continuously rotated for a long time before exhausting.
It should be noted that after adding antifreeze, it is necessary to check the heating system of the car. If the heating system of the car can be used normally, the antifreeze is in normal working condition. In addition, after the antifreeze is filled up, a little more antifreeze can be added in a day or two, which can also play the role of exhaust.
In the process of automobile use, it is necessary to regularly check the use of antifreeze. When checking, don't open the water tank cover just after the flameout. On the one hand, it is to avoid scalding, on the other hand, it is also to prevent antifreeze from spraying out, because antifreeze is very easy to be crushed at high water temperature.
When driving, if the water temperature is always too high, or the warm air system is turned on, the warm air will not play any role. It may be because there is insufficient antifreeze, or the circulation effect of antifreeze is not good, so it needs to be checked or treated in time to avoid affecting the normal use of the car. It can be seen that antifreeze plays a great role.
Volvo s60l @20 19 Location for Adding Glass Water