First, the door cover decoration design style
1, walnut floors, doors, door covers, wardrobes, cabinets, etc. , are generally decorated in a calm style. It is biased towards people over 40 years old, with mature and practical expression and strong family life atmosphere. It is often applied to the classical styles of China, Southeast Asia and Western Europe. Of course, this kind of red collocation generally appears in two decoration concepts.
2. luxury. Mansion, the place is generally beige and white heavy red, reflecting noble luxury. Of course, the basic cost of decoration is limited, mainly due to the high cost of accessories in the later period. Most of them appear in official public places such as hotel boxes, presidential suites and government offices.
3. There is no design concept. General home decoration, without expressive design style, is afraid of its own collocation, the disorder of the whole space and the expressive confusion of colors and materials, and adopts conservative color collocation. Although there will be no conspicuous places, the above problems will not generally occur, but after the transformation, the whole space will be more common or popular.
Second, the installation of the door cover matters needing attention
1, make the basic frame of the door cover. The master cut the blockboard into equal sizes and carried it all by the door cover. Generally, strong wood such as Lu 'an is used as the core material. These woods are hard, the screws are not easy to loosen, and the service life will be prolonged.
2. After the basic framework of a cascade is fixed, it is a cascade. The role of the steps is to block the gap in the door, which is very tight from the outside. Generally speaking, the door is installed on the side near the room, and the direction of opening is because it is on the side of the room. Leave a certain distance on the side of the door, which depends on the thickness of the door ordered, generally around 4-5 cm.
3. Make the panel, and then the panel. In general, the relationship between family decoration, style and plate selection is related. When pasting the panel, measure the size and cut the required panel on the whole panel with a utility knife. If it is clear water paint, it must be noted that the color difference of the panels used in the same door must be close! Decoration is to make the home more beautiful. If the color difference is too large, it will violate the original intention of the decoration.
Third, the door cover installation method is introduced
1. Select two door cover lines, and according to the scale on both sides of the door cover column, use a table saw to saw one end of them into an acute angle of 45 in the opposite direction. Uncover the layering, and pre-fix the door cover line on both sides of the door cover column with cement nails. Select another door cover line and saw one end at a 45-degree angle.
2. Saw the other end into an acute angle of 45 according to the scale of the top beam slab, so that the scale of section A is equal to the scale of the inside of the top beam slab of the door cover. Uncover the batten, and pre-fix two sharp door cover lines on the outer side of the top beam plate to make them coincide with the door cover lines on both sides of the column. Fix the three door cover lines with an air gun, remove the cement nail, cover the batten, and the device ends.
I believe that after reading Bian Xiao's introduction above, you will have a certain understanding of the decoration design style, installation precautions and installation methods of door covers.