1. Ceiling: Because the water vapor in the bathroom is relatively heavy, materials with waterproof, anti-corrosion and anti-rust characteristics should be selected.
2. Floor: Before laying floor tiles, be sure to waterproof them; after laying the tiles, ensure that the tile surface has a drainage slope (generally about 1% is appropriate), and the slope faces the floor drain; After laying the ceramic tiles, a water-closing test must be done, and the time must be at least 24 hours; when laying the floor tiles, pay attention to the joints and alignment with the wall tiles to ensure the integrity of the entire bathroom.
3. Wall: The tiles on the wall must also be moisture-proof and waterproof, and they must be flat when laying them, and must be jointed and aligned with the floor tiles to ensure the integrity of the wall and the ground; If there is a water supply pipe outlet, the cutout of the ceramic tile should be small and appropriate so that the flange cover on the water feeder can cover the cutout to make the appearance perfect.
4. Doors and windows: It is best to have windows in the bathroom to facilitate ventilation; if there are no windows, pay special attention to the details of the door. In order to prevent the water in the bathroom from overflowing, the door boundary should be slightly higher than the inside of the bathroom; the gap between the bathroom door and the ground should be left larger to facilitate the return air; if it is a sliding door, there should be a gap between the sliding door and the bathroom Make a layer of waterproofing between floor tiles.
5. Circuit laying: The wire joints in the bathroom must be hung with tin, and waterproof tape and insulating tape must be wrapped successively to ensure safety; the wire body must be covered with flame-retardant tubes; all switches and sockets There must be a moisture-proof box, and the location should also depend on the size and location of the appliance to ensure convenient and reasonable use.
6. Waterway modification: It is best not to make too many changes to the water supply and drainage lines in the bathroom. If you want to change it, it should be determined according to the specific situation. For example, if the model of the washing machine is different, the location of the water supply and drainage will also change. different.
7. Installation of sanitary ware: It is best to remember the distance between drain holes before decoration, and select bathtubs, bathrooms, toilets, wash basins and other sanitary ware according to their sizes to avoid inappropriate sizes during decoration; The installation of the toilet should be sealed with toilet mud first, and then fixed with expansion screws or glass glue, so that it can be easily repaired when the toilet is blocked.
8. Ventilation: The bathroom must have an exhaust fan, and the exhaust fan must be equipped with a retrograde gate to prevent dirty air from flowing back.
Reference source; People's Daily Online - I never thought that my wife's bathroom was decorated like this thanks to these 9 tips