* * * Pear, rubber wood, Kaasila, etc. Are slightly inferior.
Common stair solid wood materials in the market are: Congo pear, rubber wood, Fraxinus mandshurica, beech, rosewood, American red oak, red cherry, Kaasila and so on. The design of stairs determines the ornamental, safety and comfort of stairs, which embodies the importance of stair design. First, the size of the opening, choose the size of the stairs, the width of the pedals, and the shape of the stairs; Second, the height of the floor and the priority of stair step selection affect your comfort of going up and down the stairs. 1. First, consider the location and modeling factors of the decorated stairs. Stairs are particularly important for the layout of the whole home improvement, and the space occupied by stairs and the entrance and exit of stairs must be carefully considered. Stairs are usually placed in special stairwells or corners near walls to avoid wasting space or destroying the overall layout. Stair entrances and exits should be set according to the principle of convenient walking and the shortest walking route; 2. Secondly, consider the material of the stairs. The material of stairs should be decided according to the style of family decoration. Chinese style should choose solid wood staircase, and modern minimalist style should choose steel and wood stairs. In addition, if there are old people or children at home, solid wood staircase is more suitable; 3. The slope of the stairs. The gradient of stairs refers to the included angle between the front end line of each stair step and the horizontal line. Generally, the gradient of indoor decoration stairs is 30%. Too steep and too slow will affect the comfort of walking. 4. The width of indoor stairs is generally about 90 cm. If the single floor area is large, it should be appropriately extended to 95-100 cm; 5. The height of the stair handrail from the pedal shall not be less than 90cm, nor too high; 6. The gap between stair railings should not be greater than 1 1 cm. Too large a gap is not conducive to children's safety, and children's heads are usually required not to protrude; 7. Consider the possibility of meeting. The distance from the lower edge of the stair hole to the corresponding pedal should generally be more than 2 meters, and in principle it should not be less than 190 cm. This factor is often forgotten in stair decoration; 8. Stair painting. Try to choose brand stair manufacturers, because large stair enterprises usually have mature painting technology, and the paint on the surface of their products is not easy to wear; 9. The style details of stairs are the key to the whole stair decoration design. The so-called details determine success or failure An elegant staircase can always make people never tire of seeing it. 10. When choosing a stair supplier, it's best to visit its customers, experience the final quality of their products, listen to their feelings and shop around. 1 1, select the handrail size suitable for hand holding. The standard size of the handrail is 45*70, which means the most comfortable size when you hold it >>
Question 2: What are the materials of solid wood staircase handrails? There are many kinds of materials in solid wood staircase, such as European beech, American red oak, rubber wood, Lu 'an, rosewood and so on.
Question 3: What kind of wood is more practical for stair handrails? Wooden stair handrails can be made in the following ways:
Beech, elm, nanmu, Chinese fir and walnut are all good, but there is no need to be too expensive. White pine, Mongolian pine. Mongolian wood, the cost is lower, and the stair handrails in the sixties and seventies are all oak.
Generally choose Chinese fir, which is affordable and durable.
How to determine the height of the small column of wooden stair handrail?
Generally, it is only 750~800 high, because it is enough to install 900-high wooden railings for indoor decoration. Remove 50 handrails, if there are lower handrails, about 100. The standard of 900 is of course determined by the height of ordinary people, which can vary from person to person!
Question 4: What materials are used for wooden stair handrails? Considering the indoor or outdoor wooden stair handrail environment, the difference of air humidity between north and south and the characteristics of wood, try to choose wood with small flexibility, strong toughness, good finish and hard wood. The available wood in the market are: Fraxinus mandshurica, oak, colored wood, beech, elm, nanmu, Chinese fir, walnut and so on. Korean pine, white pine, Mongolian pine, etc. Only suitable for making outdoor wooden stair handrails.
Question 5: What is the material of the stair handrail? Most stair handrails are made of stainless steel, but some people use wooden stair handrails and hydraulic handrails made of wood cement. In terms of service life and maintenance, stainless steel handrails are better and more durable than wooden handrails and more beautiful and durable than hydraulic handrails, so stainless steel handrails are favored by most families.
Question 6: What is the best wood for stairs? 1, European beech, distribution: Central Europe, Britain, West Asia.
General characteristics: heartwood is very light pink to brown. In Europe, steaming is usually used to turn it red or brown. Some logs have dark red granular substances or dark textures. Beech has a fine texture and a flat and even structure. The average density is 720kg/m3, and the specific gravity is 0.72.
Mechanical properties: excellent bending performance after steaming, and the irregular texture distribution of the knot is relatively uniform, which is acceptable to general customers. Moderate hardness, high splitting strength and moderate impact load strength.
Machinability: Machinability varies greatly with different growth sites and drying conditions. Harder or improperly dried beech will have a seesaw phenomenon, or it will give off heat and smoke when cutting, so it is not easy to plan. When beech is processed by hand or with tools, the degree of difficulty is moderate and the degree of tool wear is moderate. Nailing requires pre-drilling, which is easy to glue and color, and the surface painting effect is good.
2, rosewood: rosewood is also produced in the tropics, with large wooden eyes, insufficient hardness and density, and is easily affected by the climate and environment. Moreover, high-grade solid wood staircase pays attention to the unity of the whole and details, and the stair steps should be smooth and meticulous, and black wood eyes are forbidden, so mahogany is generally not suitable for stair materials such as steps.
3, black peach tree scientific name monkey fruit, common name red cherry, holy peach tree. Tropical West Africa and the United States. Wood characteristics: strong luster, straight texture, fine and uniform structure; Medium weight and hardness, high strength; The shrinkage rate is moderate; Good rotary cutting, planing and gluing performance; Very resistant to corrosion and termites; Slow drying, few defects, suitable for planing veneer, furniture, floor and making precision instruments. Cherry sapwood varies from white to red and brown; Beautiful wood grain and exquisite wood give people a luxurious and elegant feeling, and it is also one of the fashionable materials of stairs today.
4. The scientific name of teak is teak, commonly known as carmine. Thai pomelo is produced in Southeast Asia (Myanmar, Vietnam, Laos and other places). Wood characteristics: golden luster, slightly leather flavor, oily; The structure is slightly thicker; Moderate weight and hardness; Dry shrinkage; Easy processing and smooth section; Paint and adhesive have good performance; Good drying performance and corrosion resistance. Suitable for high-grade stairs, furniture, floors and interior decoration. Teak is loved by consumers for its precious position and golden luster, giving people a feeling of luxury and nobility.
5. Rubber wood: Rubber wood is usually produced in tropical areas, while tropical plants generally have short growth cycle, insufficient density and hardness, and are easily deformed by humidity and temperature. Many merchants use rubber wood as the material of stairs because of its short growth period and low cost. As we all know, rubber wood is used to refine rubber. After rubber is continuously extracted, wood will be greatly affected.
Generally speaking, European beech is the best material for making stairs, followed by other materials. Be careful when choosing stairs. I wish the landlord can choose the stairs he is satisfied with.
Question 7: What materials should be used to install solid wood staircase at home? For the choice of wood, beech and oak are more cost-effective, walnut is better, but the price is too high. Pine is cheap, but it is too brittle to be durable as a stair board. Beech and oak are both good choices. Walnut will do if it is not expensive. The material of wooden stairs is only one aspect, and the dishes such as craft, paint quality, wood treatment technology and paint technology are the most important. The real added value is here. At present, there are many kinds of stairs in the stair industry. If you want to choose wooden stairs, pedals, railings and handrails are the most important components of the stairs, and they are also the key to designing the shape of the stairs. Let's analyze the advantages and disadvantages of several materials on the market today: 1, European beech: geographical distribution: Central Europe, Britain, West Asia. General characteristics: heartwood is very light pink to brown. In Europe, steaming is usually used to turn it red or brown. Some logs have dark red granular substances or dark textures. Beech has a fine texture and a flat and even structure. The average density is 720kg/m3, and the specific gravity is 0.72. Mechanical properties: excellent bending performance after steaming, uniform distribution of knots and irregular textures, acceptable to general customers. Moderate hardness, high splitting strength and moderate impact load strength. Machinability: Machinability varies greatly with different growth sites and drying conditions. Harder or improperly dried beech will have a seesaw phenomenon, or it will give off heat and smoke when cutting, so it is not easy to plan. When beech is processed by hand or with tools, the degree of difficulty is moderate and the degree of tool wear is moderate. Nailing requires pre-drilling, which is easy to glue and color, and the surface painting effect is good. 2, rosewood: rosewood is also produced in the tropics, with large wooden eyes, insufficient hardness and density, and is easily affected by climate and environment. Moreover, high-grade solid wood staircase pays attention to the unity of the whole and details, and the stair steps should be smooth and meticulous, and black wood eyes are forbidden, so mahogany is generally not suitable for stair materials such as steps. 3, black peach wood: scientific name monkey fruit, common name red cherry, holy peach wood. Tropical West Africa and the United States. Wood characteristics: strong luster, straight texture, fine and uniform structure; Medium weight and hardness, high strength; The shrinkage rate is moderate; Good rotary cutting, planing and gluing performance; Very resistant to corrosion and termites; Slow drying, few defects, suitable for planing veneer, furniture, floor and manufacturing precision instruments. Cherry sapwood varies from white to red and brown; Beautiful wood grain and exquisite wood give people a luxurious and elegant feeling, and it is also one of the fashionable materials of stairs today. 4. Teak: the scientific name is teak, commonly known as rouge wood. Thai pomelo is produced in Southeast Asia (Myanmar, Vietnam, Laos and other places). Wood characteristics: golden luster, slightly leather flavor, oily; The structure is slightly thicker; Moderate weight and hardness; Dry shrinkage; Easy processing and smooth section; Good paint and adhesive properties; Good drying performance and corrosion resistance. Suitable for high-grade stairs, furniture, floors and interior decoration. Teak is loved by consumers for its precious position and golden luster, giving people a feeling of luxury and nobility. 5. Rubber wood: Rubber wood is usually produced in tropical areas, while tropical plants generally have short growth cycle, insufficient density and hardness, and are easily deformed by humidity and temperature. Many merchants use rubber wood as the material of stairs because of its short growth period and low cost. As we all know, rubber wood is used to refine rubber. After rubber is continuously extracted, wood will be greatly affected. When choosing stairs, the choice of materials is very important, which can directly affect the life and beauty of stairs. Because the stairs at home are used frequently, it is very comfortable to install a good staircase.
Question 8: What materials should be used to install solid wood staircase? 1, beech, distribution: Central Europe and Britain, West Asia.
General characteristics: heartwood is very light pink to brown. In Europe, steaming is usually used to turn it red or brown. Some logs have dark red granular substances or dark textures. Beech has a fine texture and a flat and even structure. The average density is 720kg/m3, and the specific gravity is 0.72.
Mechanical properties: excellent bending performance after steaming, uniform distribution of knots and irregular textures, acceptable to general customers. Moderate hardness, high splitting strength and moderate impact load strength.
Machinability: Machinability varies greatly with different growth sites and drying conditions. Harder or improperly dried beech will have a seesaw phenomenon, or it will give off heat and smoke when cutting, so it is not easy to plan. When beech is processed by hand or with tools, the degree of difficulty is moderate and the degree of tool wear is moderate. Nailing requires pre-drilling, which is easy to glue and color, and the surface painting effect is good.
2, rosewood: rosewood is also produced in the tropics, with large wooden eyes, insufficient hardness and density, and is easily affected by the climate and environment. Moreover, high-grade solid wood staircase pays attention to the unity of the whole and details, and the stair steps should be smooth and meticulous, and black wood eyes are forbidden, so mahogany is generally not suitable for stair materials such as steps.
3, black peach tree scientific name monkey fruit, common name red cherry, holy peach tree. Tropical West Africa and the United States. Wood characteristics: strong luster, straight texture, fine and uniform structure; Medium weight and hardness, high strength; The shrinkage rate is moderate; Good rotary cutting, planing and gluing performance; Very resistant to corrosion and termites; Slow drying, few defects, suitable for planing veneer, furniture, floor and making precision instruments. Cherry sapwood varies from white to red and brown; Beautiful wood grain and exquisite wood give people a luxurious and elegant feeling, and it is also one of the fashionable materials of stairs today.
4. The scientific name of teak is teak, commonly known as carmine. Thai pomelo is produced in Southeast Asia (Myanmar, Vietnam, Laos and other places). Wood characteristics: golden luster, slightly leather flavor, oily; The structure is slightly thicker; Moderate weight and hardness; Dry shrinkage; Easy processing and smooth section; Paint and adhesive have good performance; Good drying performance and corrosion resistance. Suitable for high-grade stairs, furniture, floors and interior decoration. Teak is loved by consumers for its precious position and golden luster, giving people a feeling of luxury and nobility.
5. Rubber wood: Rubber wood is usually produced in tropical areas, while tropical plants generally have short growth cycle, insufficient density and hardness, and are easily deformed by humidity and temperature. Many merchants use rubber wood as the material of stairs because of its short growth period and low cost. As we all know, rubber wood is used to refine rubber. After rubber is continuously extracted, wood will be greatly affected.
Generally speaking, European beech is the best material for making stairs, followed by other materials. Be careful when choosing stairs. I wish the landlord can choose the stairs he is satisfied with.
Question 9: What kind of wood is better for stair handrails? It depends on your requirements. It is certain to use solid wood, and the variety will be as you like.
Question 10: What is the material of the stair handrail at home? The handrail of the stairs should match the stairs, and you can use whatever handrail you are. The types of stairs are: wooden stairs, iron stairs, tempered glass stairs, marble and so on.
Wooden stairs are one of the products with the largest market share at present. Decorated wooden stairs have a good thermal insulation effect, giving people a warm feeling. But the wear resistance is poor, and it is not easy to maintain and maintain.
The iron staircase has a strong sense of the times, novel and changeable shape, no space occupation and convenient installation and disassembly. Combined decoration material stairs. In the material of stairs, many people like to use them in combination, such as wood and iron, stainless steel and glass. From a single pure decoration material, one more element will add more interest.
Tempered glass stairs conform to the trend of transparency and are more popular with avant-garde people. Tempered glass stairs have the advantages of lightness, strong sense of lines, heavy load bearing, durability and no maintenance, but the disadvantage is that they will give people a cold feeling. Tempered glass pedals are preferably transparent and opaque.
Marble stairs are more suitable for rooms with marble floors to maintain the unity of interior decoration style. Although the marble springboard feels hard and slippery (generally with anti-slip strips), it is luxurious in decoration effect, easy to maintain, moisture-proof and wear-resistant, so it is mostly used in villas with large space.