MSA-0011(Ext) ex-s gundam is the final form of MSA-00 1 1 S gundam, and ex is the abbreviation of exotic. The aircraft has realized the idea of free switching between MS mode and cruise mode since the RX-78-2 Gundam. In the cruise state, the attack power of the machine can be comparable to that of a warship. As an MS, the aircraft also has extremely high combat effectiveness. The I field generator in the center of the chest can effectively protect the cockpit and the chest deformation mechanism; The beam knife device of knee can be interchanged with reflective Incom unit; The rear part of the leg is equipped with a thrust intensifier, which effectively improves the mobility and maneuverability of the body; Technicians also replaced the body with a more powerful new backpack, with a set of symmetrical thermonuclear rocket engines and fuel tanks on the left and right sides of the backpack, which made its thrust reach 1 1 times of the standard thrust. After the backpack engine is connected with the balanced propulsion tail wing of the body, the maneuverability of the body can be further improved. Because of the variable frame in the abdomen, this machine can use a powerful elf beam gun. No matter from which point of view, Ex-S Gundam can be said to be the strongest MS at that time.
2. Works: Gundam Sentinel
When Anaheim Company developed its No.6 Gundam (development code is θ ガンダム, that is, MSZ-0 10 ZZ Gundam), the body structure was very fragile due to the complicated body structure and deformation system of MSZ-0 10. At this time, someone put forward the idea of making full armor for MSZ-0 10, and this machine is the trial machine manufactured by Anaheim Company to practice this idea. On the basis of MSZ-0 10 ZZ Gundam, this aircraft cancels the deformation combination mechanism, and the fuselage material is not as good as MSZ-0 10, but it has been reinforced with armor and installed with a large number of weapon parts. A large number of missile launchers are added to the chest and shoulders of the body, and in order to test the function in full armor, these devices are fixed and inseparable; The Vulcan cannon in the head and the high-energy MEGA particle cannon in the abdomen are only added to maintain balance, and they don't actually fire (vases); As the main battle weapon, the large super cannon is a beam cannon with the highest output carried by MS, and it is a quite powerful weapon. Because this machine canceled the deformation combination mechanism, it appeared half a year earlier than MSZ-0 10. This plane was equipped in the mixed fleet of Alvater during the suppression of the rebellion of Peizeng Xindis.
3, it should be the original game (? Not sure)
4. Works: Mobile suit Gundam tells the story of blue fate.
RX-79BD- 1: This machine is the first experimental trial machine developed by Dr. Krste, a fugitive from Jean to the Federation. It is equipped with an examination system with NT high combat capability. At first, RGM-79[G] engine block was used in the experiment, but it could not meet the requirements of the system, so it was replaced by RX-79[G] engine block and the generator was replaced by a higher output type. Because the head of the machine is equipped with an examination system (the system is sealed with the consciousness of marion, a girl with NEWTYPE quality), it is still RGM-79[G] type head. In the experimental stage, the machine adopts magnetic film covering technology, which improves the maneuverability of the machine. The outstanding feature of the aircraft appearance is the two missiles on the chest, which is quite different from the fuselage of ordinary mass production machines; In addition, the blue painting was specially requested by Dr. Krste. The pilot of this plane is Captain Kashima Construction, who originally belonged to a special force that collected actual combat data.
RX-79BD-2: This machine is the No.2 experimental trial machine equipped with EXAM system. Because the 1 machine failed when using RGM-79[G] body, the machine used RX-79[G] body as the mother machine from the beginning. The head of the body also has eyes, which is very similar to the body of Gundam. Compared with the No.1 aircraft, the backpack of this aircraft has changed into the cosmic warfare style, and the rest has not changed much, and the color is mainly blue. In the experiment, this machine was raided by the troops of the Principality and captured by Captain Nimbus. The back shoulder painting was changed to the special red painting of Nimbus.
RX-79BD-3: This machine consists of RX-79BD 1 and the components of No.2 machine, and it is also the last machine equipped with an examination system. Because the examination system of 1 was destroyed, No.2 was captured by Ji Enjun. In desperation, this machine was urgently made into an emergency body and quickly put into actual combat. The basic performance of this machine is basically the same as that of 1 and 2, except that some functions for space activities are added. The overall painting is also dominated by white, not the usual blue in the series.
5. Works: MSV, OO80
The activities of FA-78- 1: RX-78-2 Gundam made the rumors of the new model more exaggerated. Both the Union Army and the Ji 'en Army increased their research on nt and the development of NT special machines. The Union Army decided to implement a number of development plans in the autumn, and the nt heavy armed MS plan, code-named FSWS (All-round Anti-Wear System), is one of them. The purpose of this plan is to fully armor the RX-78-2 Gundam. FA-78- 1 All Armored Gundam embodies this idea of strengthening armor and firepower on the basis of RX-78-2, but this kind of body actually failed because the main weapons greatly reduced the maneuverability of the body.
The failure of FA-78-2:FA-78- 1 Panzer Gundam did not stop the whole plan. After carefully reviewing the failure of the whole plan, the designer abandoned the previous idea of simply adding armor and put forward a new idea. On the basis of RX-78-2, the designer designed a heavily armored and heavily armed MS, namely FA-78-2 Heavy Gundam. In order to solve the problem of low maneuverability, the machine also specially adopted a new propeller developed by Habik Company. Because of this, the FSWA plan was delayed because of the propeller. The news that the widely equipped RX-78-2 Gundam was used to break MS and MA came one after another, and the necessity of heavy Gundam was seriously questioned. Finally, the plan was cancelled at 1 1, and the case of full armor was finally completed at RX-78NT 1-FA.
FA-78-3: When the RX-78-7 is designed to be as high as 7, an important design idea is to develop in the direction of high defense and high firepower, from which the aircraft was born. FA-78-3 full armor Gundam 7 belongs to the MS type that adds armor to the universe. Originally, it was put forward as the body when the RX-78-7 Gundam 7 was armored, and the whole body was fully armored to make up for the fragility of armor and weapons. At the same time, a large number of boosters are installed to make the body more mobile than FA-78-2 and other bodies. In terms of weapons, both quality and quantity are satisfactory: as the main weapon, the back beam gun with twice the range of the beam rifle is powerful, and other auxiliary weapons and optional weapons are also rich and varied. This machine is an arsenal.
RX-78- 1: Rx-78- 1 is the earliest body in RX-78 series. It was officially completed in July of U.C.0079, and has been revised many times since then. According to the technicians who participated in the development of the airframe at that time, there is no substantial difference in airframe data, style and performance between 1 and No.2. The main designer of this machine is Dr. Tim Ray, who belongs to the Earth Federal Army. Because MS refers to Jean's advantages and disadvantages; At the same time, combined with the latest research results of the northern army, it is equipped with a "learning computer" that recycles and remembers valuable actual combat data; For the driver to escape, the core regulator system is used as the cockpit and escape device; Armed with epoch-making energy cap technology, MS is equipped with beam rifle for the first time, and its performance is far ahead of that of MS in the same period. Upon completion, this machine was transported to SIDE7 for testing together with No.2 and No.3 machines, but unfortunately, it was seriously damaged by the reconnaissance troops led by Xia Ya. It was destroyed without actual combat data, and the military immediately blocked its data.
RX-78-3: This machine is the No.3 machine of RX-78 series, commonly known as "G3 Gundam". After the manufacture, this machine, together with RX-78 series 1 and No.2, was transported to SIDE7 for testing, but unfortunately it was attacked by the reconnaissance troops led by Xia Ya and was in a semi-destroyed state. After that, the aircraft was recovered to Luna-2 by the Union Army and repaired with RGM-79E components. Dr. Mosk Han was responsible for using magnetic coating technology on the driving system, using magnetic field to eliminate mechanical friction, which greatly improved the mobility of Ms. Later, he was used as a platform machine to test magnetic lamination. The modified airframe retains the core system design and is equipped with a new observation system. At the end of the war, this machine was carried on the Pegasus "Blanc Rival". Participated in the battle of ABK, but before the attack, it was damaged by accepting a forced landing. After the repair was completed, it was the last battle, and it became the test platform of RGM-79C. The engine of this machine is still the same as RX-78-2 without improvement. Gray painting is mainly used in space combat. In the novel version, Amro was killed in this plane.
RX-78-4: This machine, like No.5 machine, belongs to the second batch of RX-78 series, and the design concept of the machine body is derived from RX-78-2. Compared with unit 2, the propeller of this unit is further strengthened, and the fuel load is increased. At this time, the RX-78 series airframe has been widely applied with magnetic gas coating technology, and the generator system has been improved, and the power has been increased a lot, so that the airframe can carry large beams of weapons. The core fighter unit system of the first three aircraft in this series was not adopted. This machine is designed to participate in the final battle in the universe. So although it is still in the stage of adjustment and transformation, it also participated in the "Star Wars" of the Union Army (belonging to the Pegasus-class assault landing ship "Pure Blood stallion"), participated in the fierce battle in the final battle of Bawa Ku, and fortunately returned in the final battle (this setting was adjusted with No.5 machine in recent years-_
RX-78-5: This aircraft is the sister aircraft of No.4, which belongs to the second batch of RX-78 series and is designed for participating in the decisive battle of the universe. The airframe design concept originated from RX-78-2. This machine is basically not much different from the No.4 machine. The propeller has also been further strengthened and the oil load has also increased. Magnetic gas coating technology has also been applied. The generator system has been improved, and the power has been increased a lot, so it can carry large beam weapons. This aircraft also does not use the core fighter system. This plane participated in the "Star Wars" of the Union Army (belonging to the Pegasus-class assault landing ship "thoroughbred stallion"), and suffered great damage (the same fate as the second plane) in the final battle of Bawa Ku (note: this setting has been adjusted with the fourth plane in recent years -_-b).
RX-78-6: This machine is the sixth machine in RX-78 series and belongs to the third batch of this series. One year after the filing of the No.6 aircraft, the war basically came to an end, so this aircraft is purely a testing machine, but it also has its participation record. The No.6 aircraft is still a universal multi-purpose test pilot MS (it is also said that the No.6 aircraft can be classified as a space test pilot MS), and it is one of the redesigned aircraft bodies based on the data of RX-78-2 Gundam in the late one-year war. In order to make up for the shortcomings in the use of beam rifles and strengthen firepower, the design of this machine focuses on the strengthening of fixed armed forces. A missile launcher is added to the wrist (4 rounds in one wrist and 8 rounds in two wrists); Shoulder mounted 300mm low recoil gun, so the beam saber was specially changed to foot mounted.
RX-78-7: This aircraft is No.7 of RX-78 series, and its type still belongs to the universal multi-purpose trial MS, but the one-year war ended when it was still in the design stage. The design of the aircraft focuses on strengthening armor and firepower, from which FA-78-3 full armor Gundam No.7 and FHA-78-3 heavy armor Gundam are derived.
RX-78NT- 1: There have been different opinions about the origin and development purpose of this aircraft: some people think that this aircraft is Gundam No.4 or is modified from Gundam No.4; However, some people hold the opposite opinion that Gundam 4 and this machine are independent of each other. At the end of the one-year war, the RX-78-2 Gundam was piloted by Captain Amrore, creating brilliant results. When the RX-78 series planning headquarters reported to the Chief of Staff of the Union Army, the Joint Chiefs of Staff paid great attention to the development of nt and NT special machines. The senior management of the Union Army decided to quickly develop or refit the nt special aircraft based on the RX-78 series airframe, so as to give full play to the ability of NT drivers. In this way, in about 10 months, it was decided to develop this kind of aircraft mainly with G-4 troops adapted from V combat troops, and the pilot was Captain Christina Makanji, the 78th chief graduate of the Federal Cosmic Army NCO School. The aircraft adopts a new cockpit, which replaces the core system originally designed by RX-78 series: a 360-degree "omni-directional sky screen" around the driver. All the controls of the aircraft can be completed on a panel equipped on the driver's "linear seat". This control system allows the driver to have almost unlimited vision, making it easier to find the target. In order to improve the melee ability of this machine, this machine is also equipped with a 90mm green gun on each wrist. But on the whole, this machine does have the name of negative NT special machine, which was greatly damaged when Ji 'an army launched "Operation Ruby", and the one-year war was over when the repair was completed.
RX-78NT 1-FA: This machine is a body derived from RX-78NT- 1 Gundam ALEX, which belongs to general test MS and is equipped with armored equipment. In order to improve the body's defense ability, CHOBAM (ceramic mixed outer shield browsing active material, meaning ceramic composite external explosive reaction material) armor greatly increases the body's weight. In order to make up for this defect, the armor is equipped with an auxiliary propeller, but the effect is not obvious. It can be said that it is not worth the loss to improve defense while reducing mobility.
RX-78XX: This aircraft is one of several derivative airframes of RX-78 series developed by the Federal Army in a very confidential way, and its performance focuses on the combat capability and maneuverability of ground warfare. The aircraft is designed based on RX-78-2, eliminating the space warfare equipment and the core fighter system, reducing the weight of the armed forces as much as possible and greatly lightening the body; The added attitude control nozzle further improves the instantaneous explosive force of the aircraft body, making it superior to RX-78-2. It is claimed to be the fastest aircraft body in the earth circle, belonging to the intensive trial operation type of fighting warfare, and specially designed for white warfare. This machine * * * produced three planes, the second of which was specially prepared for second lieutenant Amro Lei.
RX-78GP0 1-04 should be regarded as GP series, so it is not listed.
All copied from MSL ... I feel a little embarrassed. ......
See the specific information and parameters by yourself ~