Why do you wear rain pants like pants, and your crotch and knees are wet?

It's sultry when wearing a raincoat, sometimes sweating, so there is steam in the crotch, so the crotch will be wet, because the raincoat is airtight when wearing it, especially in summer. Although the water outside the fabric can't penetrate, it is stuffy inside the fabric, so there will be moisture or sweat, and there will be a wet feeling, which is normal.

Strictly speaking, all the seams of raincoats and trousers should be sewn with hot-pressed strips, so that the pinholes of the seams will not leak rain. In addition, the fabrics used to make raincoats and rain pants also have waterproof tests. The more waterproof the fabric is, the more waterproof the rain pants are.

Precautions:

1, rain cloth raincoat should lift the collar after encountering water, gently shake off the water droplets, do not wipe with hands or towels, in case of reducing the rain-proof performance. After the water drops shake off, put them in a cool place to dry. Almost 80% to 90% of the time, iron once to maintain waterproof performance. Dry it when you collect it, don't squeeze it.

2. After the rain-proof cloth raincoat gets wet, it should be put in a cool place to dry, and it should not be exposed to the sun or baked with fire to prevent the adhesive layer from sticking. Don't touch oil, and don't wash it with gasoline. When storing, dry it, and it is best to sprinkle some talcum powder. Pay attention to regular inspection. If adhesion is found, it should be spread out in time to dry.

It is good to wipe the plastic raincoat with a soft cloth after rain. Don't expose yourself to the sun or bake on the fire. There is generally no need to wash with soap that is too alkaline. If the plastic raincoat has wrinkles, it can be soaked in hot water at 80℃ for one or two minutes, and the wrinkles can be eliminated.

If cracks or holes are found, they can be repaired by themselves. First, cut a piece of plastic cloth larger than the hole and cover it, then put a fine wire mesh (or board) under it and iron it with a hot iron, so that the hole or crack can be glued together. Don't sew with needle and thread after the plastic raincoat cracks, or the hole will get bigger and bigger.