First, what are the reasons why the wardrobe is not top?
1, manufacturer's plate template: the standard length and width of the plate is 1220 * 2440 mm, so most wardrobes will not exceed this size;
2, beam restrictions: the height of beams in general houses is 300-400 mm, while the height of most commercial houses is just 2.7-2.8 meters high. If there is a beam in the room, the height of the beam is just about 2.4 meters;
3. Force reason: The stress relationship of the plate of the general wardrobe, if the wardrobe is made too high, the plate is easy to deform under long-term stress;
4. Elevator size: As a commercial house, it is estimated that many people have encountered the pain of not getting into the elevator and going upstairs when buying furniture. Similarly, if the board is too long, it is easy to get on the elevator.
Second, should the wardrobe be at the top?
Advantages and disadvantages of 1, wardrobe top
Advantages: Make full use of the space at the top of the wardrobe, add more storage space, and make the wardrobe feel whole, which is very practical.
Disadvantages: The height from the wardrobe to the top is too high, which puts great pressure on the side panels. It may be deformed after a long time, which will affect the service life of the wardrobe. Because all the wooden boards contain moisture, the temperature will cause thermal expansion and cold contraction, and the top of the wardrobe will damage the decorations on the top wall. The top of the wardrobe will give people a feeling of depression visually.
2. The advantages and disadvantages of the wardrobe are not top-notch.
Advantages: the wardrobe is not overhead, sealed with gypsum board, and the sliding door is added below, which makes the overall effect fashionable and beautiful and reduces the cost.
Disadvantages: Because the wardrobe is not at the top, it is easy to get dust on the top of the wardrobe, which is not easy to clean, and it is easy to become a sanitary corner.
Third, how to deal with the space where the wardrobe is not above?
1, ceiling or gypsum board seal
It is a common practice to seal the top position of the vacated wardrobe through the ceiling or gypsum board, so that the wardrobe will not become a sanitary corner of dust, and the space will look more tidy and generous. At the same time, if you want to install central air conditioning, this design is just right.
2. Hanging cabinet
For small-sized families, the original space is relatively small, and the top of the wardrobe is also a large storage location. If you don't want to waste this space, you can also use the space at the top of the wardrobe by hanging cabinets, but this position is relatively high, and you can only store some items that are not commonly used, such as out-of-season clothes or quilts.
3, into the wall wardrobe
Wall-hung wardrobes are generally placed in the wall, so the top of the wardrobe is also the position of the wall, so the overall feeling is relatively simple.
The wardrobe is just under the beam.
If the wardrobe is arranged directly under the beam, it should probably be installed at the bottom of the beam. This kind of situation generally does not need to do any special treatment. If you really can't reach the bottom of the beam, you can add a baffle at the top of the wardrobe.
5. Leave the storage box blank
If you don't want to spend extra money on hanging cabinets, or buy finished wardrobes, leave a blank on the storage box if you want to use them. This is a more economical design.
Fourth, matters needing attention in decorating the wardrobe
1, make a plan and look at the budget. When making a decoration plan, it should be synchronized with what style of furniture is tailored. The purpose is to strive for reasonable room layout, effective use of space area and clear ideas of decoration budget. Now custom-made furniture can be measured and designed before decoration or after leveling the ground, and the design scheme can be measured and quoted at home for free.
2, visit the market or compare it online. See if there is a true and credible monopoly authorization; See if there is an after-sales inspection report; See if there is a trademark registration certificate; See if there is a standardized service system; See if there is an after-sales guarantee mechanism; See if there are standardized sales vouchers and design software.
3. Look at the plate by comparing the samples. See if the board is smooth, uniform in luster, clear and realistic in texture and natural in wood; See whether the edge sealing of the plate is fine and whether the joint is tight; See if the corners are exquisite. Confirm material workmanship and product quality through four readings.
4. Push and pull to see the accessories. See whether the hardware fittings and frames are smooth, high in accuracy, good in strength, strong in supporting force and soft in sliding. Confirm the quality of accessories and borders through five looks.
The above article, you are the information I introduced to you about how to do if the wardrobe is not top-notch. In fact, I also agree that the wardrobe should not be top-notch, and when installing, I suggest that the wardrobe be made alive, not in a fixed state, for future use. Of course, in any case, everyone will choose according to their own needs.