Outdoor telescopic clothesline is installed on the balcony, and many people will put clothes racks in the bedroom. Clothes racks can be placed on the balcony, next to the window and at the height of the bedroom, which can optimize the feng shui pattern at home. The following is the outdoor telescopic clothesline installed on the balcony.
Installation of outdoor telescopic clothesline on balcony 1 First confirm the installation position of telescopic clothesline, drill holes with electric drill, and then take out expansion screws to fix the four top seats. Then start to install the corner, the corner should be 50 to 70cm away from the movable top seat, and a triangle position must be formed in the middle of the movable top seat, which is on the same vertical line with the installation position of the crank. Then start to install the steel wire. After installation, install the hanging ball and steel wire together, and finally install the drying rod.
First, how to fix the telescopic clothesline without punching?
Just turn its screw directly and fix it. First, rotate the clothesline to a length that can be attached to the wall. Then adjust it to a proper position, and then turn the screw until it leans against the wall, so that it can be fixed. This telescopic clothesline mainly uses rotating screws to increase its connection pressure, so as to achieve the purpose of fixing and bearing.
Second, how to choose the telescopic clothesline?
1, when buying a telescopic drying rack, many people think that the thicker the drying rod of the drying rack, the better the quality. Actually, this is not right. The thickness should not be too thick, but moderate. A telescopic hanger that is too thick is too heavy to be telescopic. The drying rod thickness of the telescopic clothes rack should be between 1, 0- 1 and 2mm.
2. At present, there are many kinds of telescopic hangers on the market, such as Si-Mg-Ti-Al alloy, Al-Mg alloy and stainless steel. When consumers buy, they should choose a reputable merchant, and then they can pull the two ends of the clothesline hard. Titanium alloys don't bend, but aluminum alloys do.
3. The surface treatment methods of clothes drying rod of telescopic clothes rack include electrophoresis treatment, plastic spraying treatment, electroplating treatment and polishing treatment, among which electrophoresis treatment is the most complicated, but the surface of clothes drying rod after treatment is very smooth. Although the polishing treatment is simple, the surface has not been treated with any oxidation resistance. After a long time, the surface of the drying rod will appear black.
The balcony 2 is equipped with outdoor telescopic clothes racks. What is a telescopic clothes rack?
Telescopic clothes rack is a kind of clothes rack with telescopic folding function on the basis of ordinary clothes rack. Generally, a special folding device is installed on the basis of ordinary clothes hangers to achieve the purpose of expansion and contraction. Generally, it has simple structure, novel design and good windproof effect. At the same time, hanging clothes should be fast, convenient and practical. At present, there are many patents with this folding function in the market, but there are few telescopic hangers that have really been transformed into production stage and are well-known.
Second, the telescopic hanger installation matters needing attention
1. Installation of top seat
After the position is determined, drill a hole with an electric drill. After drilling, fix the four top seats with expansion screws (if the rod is longer than the normal size, adjust the length accordingly).
2. Installation angle
Corner can be installed on the roof or wall of balcony. The corner is 50-70cm away from the movable top seat. A triangle (45-degree angle) must be formed in the middle of the movable top seat, keeping the same vertical line with the position where the hand is installed.
3, steel wire connection
A set of clothes hangers contains two steel wires. Take out a wire first. First, one end of the steel wire passes through the bearing steel wire groove of the corner, then through the bearing steel wire groove of the movable end top seat, then through the bearing steel wire groove of the fixed end top seat, so that the steel wire is vertical to the ground, and then the top cover is inserted from the steel wire to block the top seat cover. So is the other end of the wire. The installation method of the other steel wire is the same as the first one.
Step 4 dry the connection
At the end of each steel wire, thread a hanging ball and tie a knot on the hanging ball; Then pull the suspension ball until it abuts the top seat. At this time, the steel wire is pulled out from the corner position to form a double-stranded steel wire, which is clamped on one side of the handle. Loosen the steel wire in the crank handle, put down the hanging ball, pass the drying rod through the hanging ball, and then tighten and fix the screw at the hole position of the hanging ball; Finally, plugs are installed at both ends of the drying rod.
After reading what I summarized above about the installation of telescopic boom, I believe you have a certain understanding of telescopic boom. At the end of the article, I want to remind you that there are three points that need to be paid attention to in advance when installing. First, consider the installation orientation in advance, second, measure the size, and third, fix it well. It's just that we have to consider which aspect this is in the early stage.
Install it correctly in the future, so as not to waste time in rework. At present, many communities are not allowed to install outdoor clothes drying poles privately, so everyone should also consider this factor when installing, and it is most correct to know the situation before installing finance. I hope this article can bring you some help.
Outdoor telescopic clothesline is installed on balcony 3. Installation method of sunshine clothesline
1, installation of hand crank
The hand shake is generally installed on the right side of the balcony, which is convenient for habitual use. The distance from the ground is generally 120cm, depending on the user's height. Fix with expansion screws.
2. Installation of the top seat
At the top of the balcony to be installed, measure the diameter of the lighting lamp at the top of the balcony with a steel ruler, and then mark the installation between the two sides of the lamp 15cm-30cm (the length depends on the size of the balcony). Then measure the distance from the mark to the balcony edge, and determine the width of the top seat installation according to this distance. Then measure the length of the balcony with the lamp as the center.
According to the length of the clothes drying rod, it is determined that the two sides of the lamp are equally divided into 80 cm- 100 cm, and then there are four intersections according to the measurement distance of the width, which are the installation positions of the top seat of the clothes hanger. After the position is determined, drill a hole with an electric drill. After drilling, fix the four top seats with expansion screws (if the rod length exceeds the normal size, adjust the distance accordingly).
Note: The two top seats near the crank angle are movable ends. The other two top seats are fixed seats. The difference between the two is that the movable seat is two-wheeled, and the movable seat must be installed in the front.
3. The installation angle can be installed on the roof or wall of the balcony. The corner is 50-70 cm away from the movable top seat, and it must be triangular (45 degrees) in the middle of the movable top seat, keeping the same vertical line with the installation position of the hand. Please refer to the drawing.
4, steel wire connection
A coat hanger has two steel wires. Take out a wire first. First, one end of the steel wire passes through the bearing steel wire groove of the corner, then through the bearing steel wire groove of the movable end top seat (located at the upper part of the top seat), and then through the bearing steel wire groove of the fixed end top seat, so that the steel wire is vertical to the ground.
Then insert the top cover from the steel wire and clamp the top cover. The other end of the steel wire also passes through another hole of the bearing steel wire groove at the corner, and then passes through the bearing steel wire groove of another movable wheel of the movable seat (below the same top seat) so that the steel wire is vertical to the ground, and then the top cover is inserted through the steel wire and clamped. The installation method of other steel wires is the same.
Step 5 dry the connection
At the head end of each steel wire, thread a hanging ball and tie a knot on the hanging ball; Then pull the hanging ball to the top seat, and then pull the steel wire from the corner to form a double-stranded steel wire, which is clamped at one end of the handle; Loosen the steel wire in the crank handle, put down the hanging ball, pass the drying rod through the hanging ball, then tighten and fix it at the hole of the hanging ball, and nail the screw; Finally, plugs are installed at both ends of the drying rod.
Second, the clothes rod installation matters needing attention
1, many people think that the balcony ceiling should be installed first, and then the lifting clothes rack and curtain slide rail should be installed. In fact, this view is wrong The correct way is to install the clothes rack first, and then carry out the balcony ceiling.
2. When installing the lifting clothes rack, if you want to carry out the balcony ceiling, you must first fix the ceiling with steel bars, and ensure that the length of steel bars can expose the ceiling 1 ~ 2 cm. After hanging, install the hanger on the steel bar to facilitate future maintenance. It should be noted that the ceiling is not load-bearing, and the clothes on the hanger are relatively heavy, so it must be fixed on the floor or beam to be safe. Therefore, no matter what method is adopted, structural bearing must be adopted. The balcony drying rack has been installed.
3. The installation points of the lifting clothes rack are four top pulleys, a corner device and a hand crank, which need to be fixed on the ceiling and wall. Specifically, the four jacking pulleys should be installed on a plane, and there should be no obstacles between them, so as not to affect the sliding of the wire rope. The ceiling plane should be at right angles to the wall where the hand crank is installed, so as to ensure that the wire rope is always in the center of the pulley during the sliding process, so that the pulley is evenly stressed and rotates normally.
The above is a detailed description of the installation of balcony clothesline. I hope you will understand after reading it. The sunshine clothesline has brought great convenience to our life. Nowadays people pay the most attention to health, so dressing is also an aspect of health. If clothes can be exposed to sunlight, they can be sterilized, so clothes exposed to sunlight will be healthier. I hope everyone can pay attention to it.