The floor heating water separator can be disassembled and replaced separately, because the same water separator has multiple water outlets, which can be used together or separately, and their water outlets are all equipped with independent valve devices, which can open or close the water outlets at any time. Therefore, when replacing the water separator valve, it is only necessary to close the outlet valve that needs to be replaced.
You can change the location of the geothermal water separator just after you close the house, provided that you explain the situation to the property company and get the consent of the property company. When changing positions, the water inlet pipe and return pipe must be reconnected and connected by hot melt. The water separator and the floor heating pipe must also be reconnected. The extended floor heating pipe can be clamped or melted. Calculate the distance and don't leave any future trouble.
Matters needing attention in the use of floor heating
1, when using electric heating, try not to put things like carpets on the floor to avoid reducing the heat dissipation area, resulting in poor heat dissipation.
2. When the floor heating is used for the first time, don't raise the temperature to the maximum at once, you can heat it slowly to avoid problems such as cracking and deformation of the floor due to excessive heating.
3, the floor heating water temperature should not be too high, too high will affect the service life of the pipeline, and the comfort is not good, especially if the temperature difference with the outdoor is large, it is easy to cause symptoms such as colds and fever.
4. When floor heating is used, it is necessary to do environmental protection color and check whether the formaldehyde content exceeds the standard. Because floor heating will accelerate the release of formaldehyde from the floor and pollute the room, the choice of floor is also very important when installing floor heating.