1, production of telephone pole billboard
The production of the cross-arm road flag is limited by the size and specifications, and the advertising content is also limited. If you need to express an advertiser's advertising content needs in detail, it will have a certain reaction in space vision, such as too many words. Therefore, the screen settings are mostly slogans or simple activities, which are expressed with harmonious color graphics. If you want to know more about the production of telephone pole billboards, you can click on the advertisement of sctv.
2, telegraph pole billboard specifications
Because the cross-arm road flag is hung on a lamp post or telephone pole, the specifications are not fixed. At the same time, the wind resistance of Hengdan road flag, the aesthetics of the road flag and the relevant regulations of the municipal government are considered. Suggestion: The length-width ratio of street signs is generally 1:3. That is, the golden ratio, the width of the cross-arm road flag is generally set to 40 to 80 cm, and the height is 100 to 250 cm, mainly considering the safety of wind pressure load and government regulations. Of course, road flags can also be made according to the size required by merchants. However, considering the scale and wind load of the picture, it is suggested that the above specifications are better. Generally speaking, the dimensions of the cross-arm road flag are: 50CM* 150CM, 60CM* 180CM, 70CM*200CM and 80CM*250CM.
3. Installation method of telephone pole billboard
Cross-arm street signs generally have two upper and lower bars, which are fixed on the lamp posts with screws. There are preset hanging holes above and below the flag surface of the road flag for the cross arm to pass through. Straighten and tighten the banner picture. Both sides are reinforced with plastic tie wires.