Spliced curtains are more personalized in decorative effect, and suitable materials and colors can be selected according to the overall home improvement style and personal preferences. In recent years, consumers who choose to splice curtains have a clear upward trend. The production process of splicing curtains: lay the cloth flat and check whether the two sides of the cloth are perpendicular to the bottom edge. If it is not vertical, both sides should be trimmed properly. After reserving the bottom edge of the roll, draw the required height upwards. Find the main flower as the base point, measure the distance from the main flower to the required height, and then measure the parallel lines with the main flower from each base point according to this distance. 2 cm seam is reserved, and the extra seam is cut off. Draw the bottom edge downward in the same way. Draw the size of each color matching cloth according to the size required by the processing sheet, and reserve 2 cm seam from top to bottom.
Splice each piece of colored cloth together and copy the edge of the splice. Clean the bottom of the coil with the wire end. Roll the bottom edge according to the drawn stitch. When rolling, the lower layer should be tightened, and the upper layer should be gently pushed with scissors or tweezers to make the seam shrink uniformly, and the bottom edge of the roll should not be twisted or chained. If the novice is not sure, you can iron the bottom before sewing. If the cloth is not high enough to wrap the edge, be sure to wrap the bottom with a similar color. Close stitches when sewing edges. After the packaging is completed, check whether it is stitched up and down to repair the gap.