How to find the center of the house

When determining the feng shui quality of a house, the most important thing is to find out its central point, also called "standing pole". Once the center point is found, it can be judged from eight directions. These eight directions are east, west, south, north, southeast, southwest, northeast and northwest. If the "vertical pole" is wrong, its eight directions will deviate. If the direction is really deviated, even if we follow the method of seeking wealth and turning evil according to Feng Shui, we may not get the desired results. Because the center point is wrong, the eight directions are naturally wrong, so when measuring the center point, we must not be careless and make mistakes. The correct way is to pull two straight lines diagonally at four corners, and the intersection of the two straight lines is the so-called "vertical pole" point. There are generally four ways to find the center of a house: one is to focus on the mechanical center of physics; The second is to remove the convex part and then find the center point; The third is to fill the concave part, and then find the center point; The fourth is to average the convex position and the concave position, and then find the center point. With the rapid development of economy, the appreciation of land, the leap of construction industry and the ever-changing living conditions, all kinds of buildings are refreshing. Finding the center in these ever-changing houses is sometimes very laborious. Here's the method: (1) If the house plane is square, it's the easiest to measure, just take the intersection of four corners as the center point. (2) If the house plane is rectangular, the measurement method is the same as that of a square, and the intersection of the four corners is also the center point. (3) If the plane of the building is trapezoidal, it is necessary to average the concave and convex parts to form a square or rectangular area, and then find its center point according to the square or rectangle. (4) If the whole house is square or rectangular, but only one (position A) or two (position B) on the edge has a slight part protruding, remove the protruding part and find the center point from the intersection of the four corners. (5) If the whole house is square or rectangular, and only one (position A) or two (position B) on the side has a small part of depression, then the depression should be filled up and the center point should be found according to the intersection of the four corners. (6) If the convex and concave parts on the edge of the house are large, and the areas of the two parts are not much different, it is necessary to change the convex and concave parts into square areas on average again, and then take the intersection points, so that it is easy to find the center point. (7) If the plane of the house is L-shaped, there must be a straight line parallel between the two sides, and the intersection of the two straight lines is the center point. (Author: Shen, executive director of Jilin Yijing Society)