What are the advantages of tile mosaic?
1, which brings amazing decorative effect.
Patchwork tile is a very popular tile at present, and its decorative effect is more beautiful than ordinary tiles. This kind of ceramic tile is usually chosen in homes, hotels and other places, and the decorative effect is very good, adding a lot of fresh colors to home improvement.
2. Avoid singleness and rigidity.
The color of ordinary tiles is relatively single, giving people a very monotonous feeling. However, parquet tiles are different. They are rich in patterns and spliced by different patterns, so the tiles are colorful and fashionable, avoiding the single and boring phenomenon.
3. All-hand collage
Parquet floors are suitable for different styles of decoration. People can choose different colors and textures of mosaic tiles according to the needs of home improvement, and the effect is very attractive.
4. There are many kinds
Compared with ordinary tiles, mosaic tiles not only have many varieties, but also look good. According to different structures, it can be divided into solid wood parquet bricks and composite parquet floors. Moreover, these types of parquet floors have different decorative effects and different people choose them.
Second, the matters needing attention of ceramic tile mosaic
1 Before laying the mosaic, the surface of the mosaic should be placed vertically against the wall, and the four corners should be padded with foam to prevent the sharp corners from being damaged. It is forbidden to press heavy objects on the surface.
2. High-viscosity cement or tile adhesive should be used when pasting.
3. The base surface should be free of loose objects and oil stains, and the surface should be firm, smooth and clean.
4. If the base is uneven, it should be leveled with cement first, and the thickness of the whole mosaic should be reserved, and the adhesive should be 3-5 mm thick. It is forbidden to spread directly on uneven base surface.
5. When paving the whole mosaic, it needs to be wet. If the whole brick around it is dry, the size (height) of the mosaic base must be adjusted first.
6, with serrated clay, adjust the thickness of the shop is stuck again, keep flat without empty drum.
7. The whole flower shape can be paved with the surrounding whole brick at the same time to ensure the flatness of the flower shape and the whole brick.
8. Fine-tune and find peace. Pay attention to tapping gently in the middle with a rubber hammer first, and then adjust at the edge.
Third, what are the skills of tile mosaic?
1, floor tile adhesive
Floor tile glue is a popular floor tile material in recent years. Using floor tile glue can make tiles not need to water or wet the ground first, and only meet the basic conditions of paving tiles, and the effect of glue is several times that of traditional cement mortar, so the glue is the most suitable for tile splicing, and the effect after collage will be better.
2. Cross positioning frame for edge sealing
When dealing with tile mosaic, please seal the cross positioning frame of the side bar, so that the external angle can be greatly improved during construction. First, it doesn't need 45-degree trimming treatment, and second, it can save a lot of construction time, and at the same time, it can improve the joint accuracy of tile paving and simplify the process.
Four, the shop is stuck floor tile should pay attention to what matters?
1, find the standard point.
At the beginning of laying the floor, the flatness of the floor must be controlled. If there is any unevenness, stop the floor first and re-level before paving. When spelling flowers, find a standard point. Although it may not be unified, it must not be misplaced. It is suggested that the floor can be fixed before laying.
2, do waterproof processing
When laying tiles, if the tiles are replaced, the waterproof layer of cement mortar below will be destroyed. Therefore, the waterproofing of the floor must be done well. For example, a layer of asphalt waterproof layer should be coated before tiling, and the fine seams of tiles should be mended when tiling.
3, brick surface should be set flat, the angle should be accurate, the interface should be aligned.
Before laying the tiles, it is necessary to soak the tiles for more than half a day, and at the same time, it is necessary to adhere to the special area of the bathroom, and whether there is any inclined plane or stagnant water on the ground. After all these conditions are confirmed, the tiles can be laid. The part of the floor tile needs to be covered with cardboard, and it will take off after one day to walk on the surface of the floor tile.
The above is the introduction of ceramic tile mosaic provided by Bian Xiao, I hope it will help you. If you need more information, please continue to pay attention to us, and we will have more exciting content for you.