The first 800 kilometers are below 4500 revolutions per minute and 45 kilometers per hour.
800- 1600km, 55km/h below 5500rpm.
More than 1600 km/min and less than 8500 rpm and 85 km/h.
Engine speed change
During the running-in period, the engine speed should change from time to time, and the throttle should not be fixed at a certain speed for continuous operation, so that all parts can bear the load evenly. But it shall not exceed the specified maximum speed.
3. Avoid running at low speed for a long time
When the engine runs at low speed (light load) for a long time, the lubricating oil pressure is low, which will make the parts wear and the fit is poor. During the running-in period, you can hang various gears (the scooter can appropriately increase the throttle opening) to accelerate the engine, as long as it does not exceed the specified maximum speed. But before 1600 km, the maximum throttle should not be used.
Before driving, let the oil circulate.
During the running-in period, before hot or cold starting, the engine should be allowed enough idle running time (3-5 minutes) to warm up, so that the oil can flow to all lubricating parts.
5. Pay attention to engine cooling
When the vehicle is in use, the driving time should be properly controlled to avoid running for too long. Usually turn off the engine and have a rest every 30 minutes. Pay attention to engine cooling and heat dissipation.
6. First vehicle maintenance
During the running-in period, the first maintenance of the vehicle is very important. The vehicle must complete the first necessary inspection and maintenance project within 1000 km. Ensure that the maintenance items within the first 1000 km are in place, so as to ensure the best performance of your motorcycle and prolong its service life. 1