Overall dimensions of Dongfeng Ling Rui (2-3 tons) water tank fire truck (mm): 6185×1980× 2760.
Overall dimensions of Jiangling 2-ton water tank fire truck (mm): 6225×1980× 2810.
Overall dimensions of Isuzu 2-3 ton water tank fire truck (mm): 6260× 1980× 2780.
Overall dimensions of Dongfeng single-row 4-ton water tank fire truck (mm): 6790× 2 180× 2900.
Overall dimensions of Isuzu 3.5-5t water tank fire truck (mm): 7410× 2290× 3190.
Fire engines, also known as fire engines, refer to special vehicles mainly used to perform fire response tasks, and most national fire departments, including China, also use them for other emergency rescue purposes. Fire engines can transport firefighters to the disaster site and provide them with various tools to carry out disaster relief tasks.
Modern fire engines are usually equipped with steel ladders, water guns, portable fire extinguishers, self-contained breathing apparatus, protective clothing, demolition tools, first-aid tools and other equipment, and some are also equipped with large-scale fire-fighting equipment such as water tanks, pumps and foam extinguisher.
The appearance of fire engines in most areas is red, but the appearance of fire engines in some areas is yellow, and some special fire engines are yellow. The top of a fire truck is usually equipped with an alarm, warning light and flashing light. Common types of fire trucks are water tank fire truck, foam fire truck, pump fire truck, climbing platform fire truck, ladder truck, etc.
Extended data:
Daily maintenance of dry powder truck and dry powder foam combined fire truck and matters needing attention in fire fighting.
1. Regularly check whether the dry powder in the dry powder tank is caked. When adding dry powder, it is necessary to prevent impurities from mixing into it.
2. Conduct a water pressure and air tightness test on the dry powder tank according to the specified pressure every five years, and keep it for 3 minutes. The pressure gauge value should not drop, and there should be no leakage and abnormality at all welds.
3. Dry powder gun (gun) should be purged in time after use to avoid corrosion and blockage of dry powder gun (gun).
4. Regularly check nitrogen, dry powder pipe fittings and valves, and solve problems in time when found. Check the pressure of the nitrogen cylinder every three months. When the pressure in the cylinder is lower than 12MP, it should be recharged.
5. When using dry powder truck (dry powder foam truck) in a fire, the amount of dry powder needed for fire extinguishing should be accurately calculated according to the actual situation of the fire, and at the same time, the dry powder truck (dry powder foam truck) should be as close to the fire source as possible, aiming at the fire point, and strive to successfully extinguish the fire at one time.
When using dry powder trucks to put out petrochemical fires, fire commanders should mobilize corresponding forces according to needs, do a good job of shielding, and at the same time consider using foam trucks to carry out later attacks to prevent re-ignition, so as to provide a strong guarantee for successful fire fighting.
References:
Baidu encyclopedia-fire truck